Five Things Everybody Does Wrong About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism deteriorated? Perhaps the window or door handles aren't able to connect correctly or are difficult to use.
It is essential that your double glazed doors operate smoothly, otherwise you will lose energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock at a reasonable price.
Snapped Key
If a key breaks in a lock, it can be incredibly annoying. It can also be a security issue because it could leave you vulnerable to a burglar if the door is not locked. There are fortunately simple fixes you can use to solve the problem and get your door operating properly again.
Keep calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the broken piece of the key further into the lock, making the situation worse.
Spray WD-40, or any other penetrating lubricant into the lock. This will help the broken piece to emerge more easily. double glazing repairs can also make use of a screwdriver to break pieces that might be blocking the way. If you're lucky enough to have a small piece of the key left sticking out and you want to remove it, make use of a paperclip or other metal object that is thin to grab it and pull it out. Both of these methods work well, however, be careful not to push the broken piece of the key further into the keyway.
Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades also work well for this. If you don't have one of these tools then you can bend a hook using needle-nosed pliers. Also, a pair tweezers is a good way to grasp and remove the remaining bit of the broken key.
If you are unable remove the broken key piece Use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present within the lock.
If none of these tricks are working you, it's time to call a locksmith. Fitlocks experts can quickly fix issues such as broken handles and snapped keys using uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms so that they are simpler to use. Get a double glazing repair via our website or give us a call to discuss your requirements.
Broken Cylinder
A damaged cylinder can pose an extremely risky security issue. A professional locksmith is able to fix the cylinder. To repair the cylinder, a locksmith will need to tap it. This can be done with the hammer or other tool. However, the most effective method is to employ a wire or long match. Then, place the match's tip or wire in the keyway. The locksmith can strike the lock to crack it open. This is far better than using a heavy hammer that can harm the lock.
Overheating is the most common cause of cylinder heads cracking. This can happen when the block and the cylinder head are made of various metals such as cast-iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.
Corrosion is a different cause of cracks in the cylinder. If the cylinder block and head are not maintained in a timely manner, they can rust or corrode, which can cause them to expand faster than expected. This can cause cracks in the future.
If your uPVC window or door lock is brittle and requires more pressure to turn, it could be due to a variety of reasons. A faulty locking mechanism, misalignment, or an old handle are the most common reasons for this issue.
This is a simple and cost-effective fix that a majority of double glazing owners can do. A professional locksmith will typically be able to resolve the issue within an hour of arriving at your home. They can replace the locking mechanisms, or change the window handles and change the gearboxes, based on your particular requirements. A professional locksmith will always be able advise you on the most cost-effective solutions for your home. They can even suggest upgrades to 3 Star security euro cylinders TS007 that provide an extra layer of security against burglars. This is a small cost to pay for the peace of mind that comes with knowing your uPVC doors are secure.
Broken Handle
Window handle locks have intricate mechanisms that become less effective with age and usage, so it's no surprise they occasionally break. It can be difficult to determine the reason behind the broken window handle lock and fix it correctly.
Fixing the broken handle, regardless of whether it's the internal latch or locking mechanism, will improve the security of your uPVC door and reduce the risk of draughts. It can be expensive to replace or repair the handle in a way that isn't done correctly. It can also damage the frame and the lock of your door.
With the window in the open position, loosen the screw holding the handle by using the screwdriver. The screw should be on the inside of the backplate, usually concealed by an eye-catching cap to conceal it to enhance the appearance. It is important to not lose any internal components of the handle like the plates and levers on either side. Ideally, keep them in the same order so you can replace them again in the event of a need.
Then, rotate the handle until it's 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that holds it to the internal spindle by using a second screwdriver. Once this is loose, you should be capable of pulling the handle away and pull out the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or at hardware stores). Screw it into place. Be careful not to tighten too much because this could cause damage to the handle or the window frame.
Close the handle and test it. Hopefully, it will work smoothly and you'll be able unlock your window.
While you're working on the handle, make sure to make sure your uPVC windows are closing properly. If they're not cause damp and draughts in your home as and also affecting your home's energy efficiency. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames to ensure they can shut properly.
Broken Spindle
It is more typical for the spindle to break than the handle. This is particularly typical in uPVC tilt and turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is attached a central rod that triggers the locks that are shaped like mushrooms and secure the window frame keep. If the dead latch mechanism is not able to open after the handle is turned, it is likely the spindle is damaged. This could be a frustrating problem.
There are ways to fix this problem. A good locksmith can quickly and efficiently solve the issue. They will be able to take apart the window handle using a tool that removes the wheel component of the mechanism where the spindle is. This can be done without damage to the handle or window frame.
After the wheel has been removed the technician can then inspect the spindle and determine what caused it to break. This involves breaking the spindle into its individual components and carefully observing their general condition, as well as any specific areas of damage or excessive wear. This procedure is typically carried out by technicians in an environment that is clean.
Next, clean the damaged spindle. This will help remove any dirt or other debris that might be preventing it from functioning normally. Following this, the spindle can be repaired or replaced. If it's being replaced, the technician can take an identical dowel size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle is beyond repair, it may be necessary to replace it completely. Home centers can sell generic replacements but if the window design is unique then you'll need to contact a cabinet maker or woodworker who can make the exact piece. Once the new spindle is installed, it can be positioned to the handle by lining up the holes for screws in the handle with the frame's existing screws. Once the handle is firmly in place, you can use your uPVC windows.