Five People You Must Know In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows
uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike window repairs near me and aluminium, they don't get rusty or decay.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.
For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame of the previous one easily. However, if you have double-pane windows that are held in place by internal beading it will be more difficult to take out the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.
Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.
It's a great idea to seal the gap after the glass is removed. This will prevent water and drafts from entering your property until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might think about a security door that has an integrated window as this will offer the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. However, over time, they can suffer from a variety of problems including sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.
To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.
If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.
uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. The first step is to close the window and perform a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the problem the caulking that was used up might need to be removed before a new layer of caulk can be put on. When it is time to uPVC repair, you should avoid 'over-caulking'. This will only make your window harder to clean and reduce its energy efficiency.
Check that any drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.
It is also important to note that if the leak originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.
Like any mechanical part, hinges can wear out over time. It is very easy to change a window hinge, but it's easier if someone else helps hold the frame.
Check that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.
The issue can be caused either by opening the window improperly or a faulty installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are more than happy to give suggestions.
Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form where the sash meets the frame. If they are beyond repair, it might be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, may be misaligned. Again, it is feasible to give them a good clean, but in some cases it might be necessary to have them replaced.
The second most frequent reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce draughts.
Another method of reducing draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking out cold air.
With a little maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.