Do Not Buy Into These Trends Concerning Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't get rusty or decay.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is important to make sure that your windows are in good working order.
For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. However If you have double pane windows that are secured by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.
If you are going to try to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.
It's a good idea to seal the gap after the glass is removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.
2. Sagging
uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.
Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll need open the window to access the frame. After that, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.
If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and secure from draughts.
uPVC handles could also become loose. Often upvc window repair is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will make your window harder to clean and reduce its energy efficiency.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal rather than the frame. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. They can be replaced by any competent DIYer and can be done within a few minutes.
Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is simpler if you have someone to assist in holding the frame up.
Make sure that the uPVC hinges are closed and open in the proper direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.
Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you suggestions.
It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by different things. The hinges may also become unbalanced due to wear, creating gaps where the sash meets frame. These can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them realigned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace them.
These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.
Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.
With a bit of regular maintenance and repair windows made of upvc will provide excellent security and insulation for your home. However, it is important to recognise that all windows have a life span and there may come the point when it's more economical to replace them than repair them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.