15 Terms Everyone Who Works In Automotive Key Repair Industry Should Know

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition
We've all had this experience the car keys won't turn in the ignition. It happens at the most inconvenient moments, like when you're filling your car with groceries or on your way home from work.
There are a variety of solutions that can get you back on your way. Here are some of the most common key issues in the automotive industry and their solutions:
Broken or bent key
A bent key is the most frequent reason why a car owner is unable to start their car. Straightening the key is a simple fix. It might sound easy but it's important to do it carefully. The key is very thin and can break if bent even a little.
To do this, you'll require an area with a solid foundation, as well as pliers. Grab one end of the key using the pliers, and then bend it back until it is straight. This is best done on a flat surface or in a vise. You can then place it in the lock to see if it turns.
If not, you may need to get a new one created. You don't have to contact a locksmith and your existing key will work.
It's a good idea to keep a spare in your pocket, so that you don't end up without a way into your vehicle in the event of a lost key.
If you're having issues with a bent or broken key, try applying some lubrication on it before trying to insert it into the lock. This will allow it to move through the cylinder and will prevent it from getting stuck. It is possible to use a spray lubricant or graphite powder. If using a spray, ensure you attach the plastic tubing that came with it to ensure an easier application. This will also help keep moisture from damaging your key.
Pins that are snuck or springs
Sometimes a pin (also known as a roll pin) or spring may become stuck. A pin is a small piece of steel that measures between 5.1 and 7.6 cm (2.5-3.0 in) long, with hollow ends. It is used to connect two parts of machines. In most cases you can remove a nut by pulling it out with your fingers or the wrench.
If you own an older vehicle that has a microchip key it is possible that the key needs to be programmed in order to work with your vehicle. This process can be simple or difficult depending on the car's model and manufacturer.
If you need assistance with your automotive keys or locks, give us call! We can repair, replace or programme nearly any key for your vehicle.
Gear Selector
If your car's gear selection gets stuck in park mode, you need to get it checked by an expert mechanic immediately. It's a security issue and could cause serious damage to your vehicle if you continue to drive it. This problem could also indicate larger issues with the transmission itself, which can be expensive to fix.
Most of the time the issue is fixable. The most common reason the gear selector may be stuck is because one of the cable ends has snapped, or become uncoupled from the lever itself. browse this site can fix this issue in a matter of minutes.
In certain instances, the bushing of the gear selector might be damaged or worn. These are rubber coverings that cover joints within the gear system to help it shift more easily. They function in a similar way as cartilage in your knees, therefore it is important to ensure that they stay healthy and flexible.
You can prolong their lifespan by doing a few easy things. First, you should avoid using the gear selector during extremely cold temperatures. This is because the cables controlling the gear are often prone to freezing and cracking. It is also recommended to replace your bushings, for instance the ones manufactured by First Line, with high-quality ones.
These bushings form an important component of your gear selector, and should not be ignored. If you find that yours is wearing out, it's a good idea to visit an auto shop that is specialized in Land Rover repairs. They can assist you to locate the ideal parts to restore your gear selector apparatus. They can also provide a range of other services, including maintenance and repair of your transmission.
Dead battery
If you turn your key in the ignition and you hear nothing except a click, your battery is dead. The majority of batteries last between three and five years and as they age they go through an natural process that causes them to end up dying prematurely. This is because the negative plates of the battery in your car begin to become coated with sulfate crystals.
A dead battery could cause you to lose the power source in your car, causing the radio or the electric windows to stop working. If your car is having problems starting in cold weather, this is an indication that it's time to get an upgrade to your battery.
Sometimes, the issue may not be caused by a dead battery, but a problem with the charging system of your vehicle. This issue can be solved by having your mechanic check that the alternator, serpentine belt and battery cables all work properly.
Key fobs that are not functioning properly is a common automotive key repair . The key fob is a tiny device that connects to your vehicle's computer and relays signals and commands between the engine and accessory systems. This system can get confused or cease communicating with your vehicle when it is exposed extreme temperatures or is wet.
Follow the directions in your owner's guide to reset the keyfob that was lost. Depending on your vehicle you may have to open and close the doors, turn the lights and other electronic devices off and on by pressing a specific sequence of buttons, or even shut and open the windows. If this doesn't solve your fob, it could need to be professionally programmed and will require an expert technician. It's worth trying these simple methods before you buy the new fob.
Ignition socket
Modern car keys include a transponder chip built into them that transmits an electronic signal to a receiver within the ignition when it is inserted. The signal informs an immobilizer if the key is correct to allow the car to start. In the 1990s theft of cars became such a problem that most manufacturers installed this transponder security device in their vehicles to ensure safety and insurance purposes.
If you have a brand newer vehicle, the only option to replace your key could be through the dealership or by calling the manufacturer directly. Before you go note down the VIN number of your vehicle (vehicle identification number). This number is usually found on the dashboard, the door jamb, or in the owner's manual.
Bring your current key to an participating AutoZone store and a representative will utilize a machine to trace the contours of your key blank to accurately duplicate the original key. The new key will be cut on site by a cutting machine that is precise. If the key you are using has blade, fob or a large grey/black head it must be programmed for your car before you can use it to start the motor.