15 Reasons To Not Ignore Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism become faulty? Maybe the window or door handles don't meet up correctly or are difficult to use.
It is essential that your double-glazed doors work smoothly, otherwise you'll lose energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at an affordable price.
Snapped Key
It can be frustrating when a key snaps into a lock. It can also be a security issue because it could expose you to burglars if your door is not locked. Fortunately, there are some quick fixes you can try to resolve the issue and get your door operating properly once more.
Remember to remain calm. If you panic you could end up pushing the broken key piece further into the lock.
Next spray WD-40 or a different penetrating oil into the lock to help the broken piece slide out more easily. You can also use a screwdriver to help break up any pieces stuck that could be blocking the way. If you're lucky enough to have a little bit of the key left visible, you can make use of a paperclip, or any other metal object that is thin to grab it and remove it. Both methods work, but be careful not to push the broken key further into the keyway.
Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you do not have any of these handy, you can use needle-nose pliers to bend and create hooks. Finally, a pair of tweezers can be used to grasp and pull out the last piece of the key that was broken.
If you are unable remove the broken piece of key Use a lock deicer. It's usually available at most hardware stores. It works by freezing any moisture or ice that might be in the lock.
If none of these solutions work, it could be time to consult a locksmith. Fitlocks experts can solve problems like broken handles or snapped keys using uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. You can book a double-glazing repair online or call us to discuss your requirements.
Broken Cylinder
A broken cylinder can be a serious security risk. Luckily, it's an easy repair for an expert locksmith to complete. A locksmith will have to tap the cylinder in order to fix it. This can be done with a hammer or other tool. However, the most effective method is to employ a wire or long match. Place the match or wire's end close to the keyway. The locksmith will strike the lock and break it open. This is far better than using a heavy hammer that could cause damage to the lock.
The most frequent cause for cracks in the head of a cylinder is due to overheating. This can occur when the block and cylinder head are made of various metals like cast-iron and aluminium. When different metals heat up and cool down at different rates, it could cause localised hotspots that expand faster than the rest of the head of the cylinder, leading to cracks.
Another possible cause for cracks in cylinders is corrosion. If the head and block of the cylinder are not maintained properly, they can corrosion or rust, which can cause them to expand faster than anticipated. This can lead to cracks in the future.
If your uPVC window lock or door is brittle or requires an enormous amount of pressure to turn, this can be the result of several things. This problem can result from a defective locking mechanism or misalignment as well as a worn-out handle.
Fortunately, this is an easy and inexpensive fix for most homeowners of double glazing. A professional locksmith will usually be able solve the issue within an hour after arriving at your residence. Depending on the needs of your home, they can replace the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to advise you on the most cost-effective solutions for your home. They can even suggest upgrades to the highest-security 3 Star Euro cylinders, TS007, that will provide an extra layer of protection against burglars. This is a small price to pay for the security that comes with knowing your uPVC doors are secure.
Broken Handle
It's not a surprise that window handle locks could break. They are equipped with complex mechanisms which deteriorate over time. If yours is damaged it may be difficult to identify the cause of the issue and make sure that you repair it correctly.
If the issue is related to the locking mechanism inside or the latch, fixing your broken handle can improve your uPVC double glazing door's security and allow you stop draughts. It can be expensive to replace or repair your handle if it is not done correctly and can also damage the frame and the lock of your door.
With the window open then loosen the screw that holds the handle using a screwdriver. The screw should be located on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic purposes. Be careful not to lose any internal components within the handle, like the levers or plates on the opposite side of the spindle. Keep them in the same order to make it easier to replace if necessary.
Then, rotate the handle so it's at 90 degrees to the window frame and loosen the screw on the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is loose, you should be able to pull the handle away and pull out the broken spindle. Replace it with a brand new one, ensuring it's the same length as the old one (you can usually find these online or in hardware stores) and screw it securely in the right place. Do not overtighten the screw as this could harm the handle as well as the window frame.
Check that the new handle is fitted Close the window and test the handle. It should operate smoothly, and you will be able open your window after a few times.
While you're working on the handle, be sure to check your uPVC windows are shut correctly. If they don't, you could experience damp and draughts in your home, as well as compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges of your window frames to ensure that they shut correctly.
Broken Spindle
It is more common for the spindle to break than the handle. This is especially typical in uPVC tilt and turn windows. These windows require a handle that is a lock mechanism that is located in the frame of the window. The handle is attached to a centre rod that in turn activates cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism fails to open when the handle is turned, it is likely that the spindle has been damaged, this can be a frustrating problem.
Luckily there are options to rectify this issue. A good locksmith will be able to quickly and effectively address this problem. They can take apart the window handle using a tool that can remove the wheel component of the mechanism where the spindle is. This can be done without damage to the handle or window frame.
After removing the wheel, the technician can inspect the spindle and identify the cause of the break. This involves disassembling the spindle, and then examining each component, noting any damage or excessive wear. The process is done in a clean, well-lit room by highly skilled technicians.
The next step is to clean the damaged spindle. This will remove any dirt or debris that might be hindering its normal functioning. The spindle may be replaced or repaired. If double glazing near me is replacing the spindle, he can use a dowel that is the same size to the original. He will then drill matching holes into both pieces. This ensures that the new spindle is a precise fit with the handle.
If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centres sell generic substitutes however if your window style is rare you'll require contacting a cabinet maker or woodworker who can replicate the exact component. Once the new spindle has been installed it can be attached to the handle by line up the holes for screws in the handle with the frames existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.