15 Gifts For The Repairs To Upvc Windows Lover In Your Life

Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum and timber.
It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good condition.
For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.
Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.
Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap is large, you might think about the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.
To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to reach the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.
If you can't reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.
UPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close your window and do an experiment to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.
3. Water Leaks
It is crucial to take action if wake up every morning to find a smoky wall and wet floors. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.
It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.
It is important to check that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe cases, you may need to replace the window.
Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the house.
If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and open with a breeze It could be hinges that are at the fault. They can be replaced by any competent DIYer and are usually completed in a matter of minutes.
Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It is essentially a simple process, but it's easier to do if you have someone to assist in holding the frame in place.
It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue could be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to offer advice.
It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by different things. The hinges can also be unbalanced due to wear, creating an opening between the frame and sash. They can be fixed by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. The interlock, which is located on the hinge of the window and can be misaligned. Again, full report to give them a good clean, but in certain cases, it may be necessary to have them replaced.
The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.
Another, and most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be placed on the top of your windowsill. They will keep your home warm by blocking cold air.
The windows made of upvc can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.