10 Myths Your Boss Is Spreading Concerning Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like aluminum or timber.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause serious damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.
For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. However If windows with double panes are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this case you'll need find some plastic spacers to help the new pane to fit properly into the window frame.
If you're planning to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall onto the fabric rather than on the floor where they can be trampled upon and cause further damage.
It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your property until a professional comes out to repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is large, you might prefer security screens that has an opening. This will provide the best of both.
2. Sagging
uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts or even security. It is crucial to act when you realize that your uPVC windows are sliding.
Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fitting. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.
If you cannot reposition the hinges, you could have to replace the seal. window repair near me may dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.
uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.
3. Water Leaks
It is essential to take action if you get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.
This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the problem the caulking used previously might need to be removed before a fresh layer is applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.
Check that any drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.
Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.
If the leakage is occurring between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.
Like any mechanical part hinges will be damaged over time. It is essentially a very simple process, but it's easier if you have someone to assist in holding the frame up.
Verify that the uPVC hinges open and close in the proper direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should open.
Faulty window hinges could be caused by improperly opening the window a certain way or due to improper installation in the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.
Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to get them aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace the hinges.
The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the possibility of draughts.
One of the most effective methods to reduce drafts is to use an draught excluder. These are typically made of fabric filled with some type of filler. They can be put on the windowsill on top. They can keep your home warm by blocking out cold air.
The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as you can.