10Pinterest Accounts You Should Follow Window Repair

Window Repairs
Window repairs can save homeowners money and keep their homes warm. In the event of severe damages such as broken glass or a cracked frame, window replacement may be required.
Many other problems are fixable to extend the lifespan of windows. The most frequent issues are:
Broken or cracked panes
Glass that is cracked can be caused by a lawnmower that throws rocks in the wrong direction or branches of trees being blown by strong winds. This not only looks bad, but it can result in more energy costs because the broken pieces let cold air in to your home. Luckily, it's typically easy to fix windows with broken panes.
Start by carefully removing the glass with gloves and safety glasses. You may have to use an utility knife to break loose the old glazing compound or putty around the frame's edges. Then, use a soft paper towel or cloth to wipe the glass's surface and the wood of the frame.
Once the frame is clean, apply a waterproof silicone caulking on the frame's perimeter. This will stop water from entering through the crack, which could cause further damage to the frame and the glass.
A bad crack in double-paned glass may affect the gas between the panes, which can make your windows less efficient in insulating. If the crack is serious enough to compromise the integrity of the glass, or in the case of an inner pane that's completely missing, it might be time to contact a professional.
Cracks caused by thermal stress can occur when there is a drastic difference in temperature between your home and the outside. The glass is then able to expand and shrink. If the cracks are situated on two sides of a window it is recommended to replace it rather than attempt to repair it.
For cracked windows that aren't quite ready to be replaced clear tape can do a great job of stabilizing the crack and keeping out bugs and cold air. You can cut a piece of nylon stocking or tarp that's sufficient to cover the crack, and fix it with duct tape. This isn't a permanent solution, but it can keep insects out and cold air away from your home. If your windows are older and you're beginning to see cracks in the glass, it's a good idea to check with your local window manufacturer regarding whether replacing the entire window could be a better option for you.
Rotten Wood
Wood rot is among the most common problems with windows. It can alter the appearance of a home and also pose a safety risk. However, it is possible to repair rotted wood. First, you will need to ensure that the root of the rot has been taken care of. Check for roof leaks and other areas where water can enter the wood.
The next step is to take out any rotten parts of the window frame. This can be done with a claw hammer, chisel or a rasp. After the rotten areas have been removed then you must replace them with new wood. Pre-treated wood is recommended for this task, since it is resistant to rot. If discover this are not able to replace the damaged timber, you can use filler and wood hardener to reinforce the damaged area. This kind of product can be available at a majority of hardware stores. Follow the directions on the label of the product to ensure the most efficient results.
After you have repaired the rotten areas of the windowsill, it's essential to protect the newly-repaired area. You can do this by applying an water-resistant wood sealant. Sikkens, for example, is a great product to apply.
Use a two-part epoxy to protect the wood against further damage. This product is easy to apply and leaves a beautiful finish. However, it's important that you follow the application instructions on the label. Once the epoxy filler has dried, you can sand down the surface of the wooden. Start with a rough sandpaper then move on to a smoother grade.
The final thing you want to do is make the area that has been damaged by exposing it to more water. It is a good idea, so, to cover the repaired surface with an oil-based primer which will shield it from water. After that, you can apply the waterproof wood sealant.
The W won't let you open
A window that isn't opening can be the result of many factors. The house could have settled, or the wood frames may have warped in humid weather. Someone might have also nailed them shut for security. With a little patience and the right tools, you can open most stuck windows.
Gunk or debris that has accumulated can be a major cause of a window not opening. Acme Glass notes that dirt and grime accumulates over time on the sliding tracks, hinges and locks. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Spray grease on these areas can aid in preventing oxidation and ensure that your windows are operating correctly.
The pulleys that raise or lower the window could become loose, or even break. These components can lose their tension and become obstructed, especially when the window is situated at least two stories above the ground.
If you are having trouble opening windows Try using a pry bar to gently force the window to open a bit at each time. Place a block of wood on the frame to give your pry bar more leverage. Also, be careful not to scratch the window or wood. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.
A faulty spring can also be the cause of a window that won't lift or lower. You'll need to refer to the owner's manual for more details depending on the person who made your windows.
If you've tried cleaning and lubricating the moving components on your windows, but they still aren't opening, it's time to replace windows. Homespire Windows & Doors provides windows that are energy efficient. Don't let your windows slide from functional to useless, as windows that aren't properly shut can make your home vulnerable to water damage and burglary. Contact our team today for more information on our replacement windows and services!