11 Ways To Totally Defy Your Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.
Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. However when windows with double panes are anchored by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.
If you are going attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.
Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, since this will offer the best of both worlds.
2. Sagging
uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.
Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in place.
If windows repairs to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.
UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it can also be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close the window and then perform an experiment fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.
3. Water Leaks
It is crucial to take action if wake up every morning to discover mouldy walls and floors that are wet. Windows that leak water do can not only cause destruction of your home's structure but also hamper your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.
It is a fairly easy fix that can be completed by any DIY expert. Depending on how severe the problem is, the old caulking may have to be removed. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.
It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal than the frame. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open or it opens in the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.
Most households in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. It is very easy to change a window hinge, but it's simpler if you have someone to help you to hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.
The issue can be caused by opening the window improperly or by a poor installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to provide assistance.
It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the risk of a window sticking and prevent corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes an opening to appear where the sash meets the frame. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. In addition, the interlock could be misaligned. This happens on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace them.
These seals can wear down or be damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.
The last way to reduce draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cosy!
With a little maintenance and repair, your upvc windows will provide excellent security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and they may reach an point at which it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance immediately.