5 Laws That Will Help With The Double Glazing Seal Repairs Industry

Double Glazing Seal Repairs
When double-glazed window seals are broken this can lead to mould and damp. This could cause damage to the frame as well as the walls surrounding it, in addition to affecting your health.
Fortunately, the majority of uPVC windows can be repaired by sealing, not replacement. A glazier will clean the frame and the glass of the window. They will apply a new bead and smooth it.
Water Leaks
Window seals are designed for water to stay out of your home. However, when they begin to wear down, it could result in water leaks around your windows. Not only is a leaky window unpleasant however, it could also cause significant structural damage to your home's structure. It is crucial to spot the issue early and get it repaired by an expert before it gets worse.
The cause of windows that leak can be found in the glass itself but on the frame or sill. This is the most typical indication of a failed seal. It can be caused by damage to the window seal due to weather or aging, worn out caulking, or even an obstruction in the drainage area resulting in a build-up of water or ice.
Another indication of a window seal failing is the appearance of water between the panes of double-glazed windows. This isn't as hazardous as a leak from water, as the water does not travel far enough to reach into your home. However, it does mean, that the inert gases that are trapped between your windows have escaped out. This will reduce the insulation value of your window.
The final sign of a failed window seal is condensation that forms between the panes. This may be caused by the window seal failing, or it could be due to the humid climate of your home or an issue with the glass. The condensation can not only be irritating but it can also cause the growth of mould and mildew within your home, which can be very difficult and expensive to remove.
It's time to inspect your double-glazed windows when you see these indications. A repair or replacement will help protect your home from water leaks, reduce energy bills, and prevent drafts. It's a small cost to pay for the comfort and safety of your family. Contact Thompson Creek Window to discuss your options regarding window seal replacement or repair. Our experienced professionals are happy to assist! We offer assistance to homeowners in the Mid-Atlantic.
Condensation
A broken double-glazing seal can allow water to enter the space that is used for insulation. This can lead to fogging or misting within the window panes.
If you notice condensation developing within your home, it's the perfect time to call an experienced double glazing repair service. Condensation could indicate that the vacuum seal created at the factory failed and moisture has seeped into the insulation.
Condensation can be caused by a range of causes, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. There are a variety of options for repairing double glazing seals however it is essential that the new seals are properly size to ensure a perfect seal and a tight fit.
Typically, the gaskets that are used to seal the gaps between double-glazed units are made from polyurethane foam. These are designed to be long-lasting but they are susceptible to deterioration in time due to natural wear and tear and exposure to various temperatures and weather conditions throughout the year.
Over time the foam may shrink or crack and this results in a crack in the seal, which allows moisture to creep into those areas of your double-glazed windows. This can lead to condensation and a loss in energy efficiency.
Re-sealing windows is one solution to this issue. This isn't a 100% solution as it will eliminate the condensation that is already present and not address the issues that are causing the double-glazed windows to leak or develop condensate.
Another option is to have your windows replaced completely. This should be handled by a professional that offers an insurance backed guarantee. If the company fails, you're still protected by insurance. It is important to remember that your replacement windows should be warranted for at minimum 10 years.
Misting
Check that your double-glazing seals are in good condition as the fall season approaches. Seals that have worn out can affect your windows' insulative properties, but also cause condensation, mold and dampness. It is crucial to fix any problems in your double-glazed windows as soon as possible to prevent further damage and save on energy bills.
A standard double glazed window is made from two panes of glass held together by an internal space filled with gas. An outer sealant layer then fills in the gap between the uPVC frame and the glass. This is crucial to maintaining the air-tight seal which keeps cold and warm air from your home, thereby saving the cost of heating. The seals may become damaged in time because of weather conditions, ageing or improper installation. The encapsulation formula that makes double glazed windows so effective can begin to degrade as soon as this occurs.
If not checked, damaged or faulty seals could lead to damp and condensation which will not only ruin the appearance of your windows but could also affect your health. The presence of mould and damp can cause damage to your floors, walls and ceilings, but also cause allergens and irritants within your home, which can be harmful to you and your family's health.
The most common problem with double glazing is the misting that occurs between the panes. This occurs when moisture gets into the insulated part of your window and is difficult to fix without professional help for repair of the seal on your double glazing.
There are DIY ways to deal with this issue, however, we'd recommend against this because it's not only dangerous but also extremely hazardous and damage your windows. These methods involve drilling holes into your glazed unit and using chemicals to remove fog & condensation. This could lead to various problems, most notably exposing your windows to water damage that can ruin the unit altogether.
Professional glaziers possess the tools and skills to safely seal uPVC frames. They can also offer you long-lasting results. They can also offer suggestions on how to properly maintain your uPVC window to avoid future problems.
Draughts
A draft coming through your window is a sign that the sealant is likely to have been damaged. It should be repaired or replaced. This will prevent cold air from getting into your home. It will also increase efficiency in energy use, decrease heating costs, and improve the comfort.
It is important to know that some draughts are not caused by the window seals, but rather by the gap between the frame of the bricks. In certain cases, it can be possible to fix the issue by filling the gap with silicone caulking. If this is not working, it will require resealing professionally.
If the sealant around double-glazed windows begins to fail, it allows water ingress. This can lead to dampness or even mold. This can then affect your health and could be detrimental to the property. It is crucial to take care of any water ingress problems when you spot them. And if your windows are still covered by a guarantee, it is worth contacting the company you bought windows from, as they may cover the cost of the repairs.
It is important to determine whether the windows are covered under warranties. Some companies offer lifetime warranties, while others only cover 10 years. If your double glazing falls under warranty, you should contact the company that sold them as fast as you can and let them know about any issues you're having. Ideally, it is best to do this in person, or via mail or email, to ensure that everything is recorded and clear.
It is also important to remember that draughts are often caused by faulty hinges, rather than an ineffective seal. The hinges close the window sash which is the one that you open. If they're not regularly oiling them they could become stiff. This could cause a gap be created between the sash frame and the sash, allowing cold air to enter the house. This issue can be resolved by replacing these hinges without impacting window seals.