16 Facebook Pages That You Must Follow For Double Glazing Lock Repairs Marketers

Double Glazing Lock Repairs
The use of high-quality locks on your doors and windows will stop burglars from accessing your home. They usually don't want to break glass or try to squeeze through windows.
However, some double-glazing owners have had issues with their door lock or window lock after it was installed. Fortunately, these issues can be fixed without having to purchase new double glazing.
Broken or Faulty Locks
A locksmith can repair your uPVC window or door lock if it is broken or faulty. They can fix hinges, striker plate and locks for your double glazing. They can also reposition the cylinder to fix any misalignment issues which could cause your handle to not operate correctly.
If the key fits in the lock, but it doesn't turn or is difficult to insert the mechanism might be locked up. This could be due to grime or dirt getting stuck in the mechanism. If this is the case, it is possible to clean the lock and lubricate it. It is crucial to make use of a dry lubricant like graphite or teflon instead of oil, which attracts dirt and stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should make its way through the mechanism and the lock should be able turn without difficulty.
A malfunctioning lock could be caused by loose screws in the lock mechanism. They can loosen, fall out, or even break completely preventing the lock to perform as it should. These screws can be tightened with the help of a screwdriver. However, be careful not to overtighten them. This could cause damage to the internal components.
A damaged lock could be dangerous for you and your family members especially if you have young children. It is possible for them to open the door without your knowledge and allow them access to your home. If you're concerned that this might occur, a professional locksmith can assist you secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing company based in Lancing that can fix all kinds of damaged and broken mechanisms, handles, cylinders and lock systems on uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific requirements, meaning that in most cases, replacement windows and doors are not required.
Handles that are damaged or broken
Many double glazed windows feature a multi-point lock as a part of the overall security package. This is a great choice for those concerned with opportunistic thieves looking to gain entry to your home. It is also a good idea to ask your installer about anti-lift blocks that can be installed on top of the locks that are already in place to ensure that your window is secured in its closed position.
It's not uncommon for the handle locks to become damaged or fail. They are the first part of your window that could be pushed open by criminals intent on breaking in. Luckily, the good news is that this is among the easiest parts to fix.
Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette which is designed to ward off forced entry. This security upgrade is usually offered as an optional extra on new uPVC window installations. As an optional upgrade older style handles made of aluminium or uPVC that are no longer in use can be upgraded to a shoot bolt locking system.
When a handle is faulty it's important to get this repaired as quickly as possible. Faulty handles may prevent the window from closing properly and allow a draft to enter. It may also be a weak point that burglars with a plethora of opportunities could exploit, therefore placing your home and belongings at risk of theft.
To repair the broken mechanism, you first need to access the window frame and then remove the damaged handle. The gearbox that opens the handle is accessed and the type identified so that a replacement can be sourced which matches the profile of internal window frame mechanism.
After the mechanism has been repaired the handle can be reattached using the original screws. We recommend replacing them with more long screws since they provide a more secure fit. The final stage is to apply a coat of clear sealant in order to protect the handle from further rust. Once that's done, your window will be operational again and at a fraction of the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows do not close properly, you may be experiencing draughts, an affliction of your home's security and an increased risk of water or damp damage. double glazing window repairs or defective window hinges are a frequent issue that can be fixed easily.
If you have a uPVC window that isn't able to open or close it's likely that the hinges are damaged or broken and need to be replaced. While many window companies require you to purchase a new window unit in order to solve this issue, we're able to replace the faulty hinges and save you money.
Window hinges are usually damaged by repeated use, or weakened over time by corrosion. In the event of a broken hinge, it's important to take steps to prevent further damage by taking care not to force the window to close or open.
You can find the right parts for your hinge by identifying the type of hinge it is. The most commonly used types of window hinges are Maco, Mila, Roto and other brands. It's best to consult an expert in this situation so that you don't make the mistake of purchasing parts that aren't compatible with your existing hardware and cause further damage.
A damaged hinge can be a huge problem for your uPVC windows and doors. They can be a significant source of noise and also allow water to infiltrate which can damage your windows.
To resolve this issue, first make sure that the pin barrel on both hinge halves is aligned. If it isn't, tap the headpin with the hammer to make a slight bend in the hinge barrel. This will help keep the pin in place. Then, ask a helper to hold the door as you take the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges with those that are the same size and then attach the screws using glue. Finally put the hinges in place using clamps or weights until the glue sets.
Once the hinges have been fixed and repaired, you should be able to put back the door and re-attach the handle. Replace the screws with wooden dowels of the same size as the original screw to ensure they are in line.
Broken or faulty glass
While uPVC windows do a great job of keeping the cold out and the heat in, they can become damaged over time. This can include broken or damaged glass, as well as faulty locks. This issue can be costly should it be left unattended. It also can detract from the aesthetics of your home and could lead to a loss of insulation, so it's crucial to repair any damage as quickly as you can.
You can repair the crack in your glass by yourself if you have the proper tools and techniques. First, make sure the surrounding area around the glass is clear so that any shards won't harm anyone and aren't an accident hazard. Next, remove any pieces of broken glass and dispose of them properly. Apply masking tape across the entire area. This will prevent glass fragments from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to adhering it to the wall is recommended when you have a window that has two panes. This will ensure that you have enough room to finish your project.
Before applying the glue wipe the surface of the broken frame and glass with a an unclean, dry cloth. Follow the instructions for application and curing which may differ from one product to the next. You may need to clamp the broken glass with clamps made of lightweight materials designed to hold fragile materials, based on the angle.
When the adhesive has completely set, carefully place the glass in the window frame, ensuring it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Be cautious not to flex the window as it's being installed, as this could weaken the seal and lead to condensation and water infiltration.
If you have a glass window that is broken completely or has bigger cracks, contact a professional glazier like O'Brien(r) to arrange a replacement. Unattended handling of broken glass can cause danger to pets and children, so it's essential to act swiftly.