20 Repair Window Websites Taking The Internet By Storm

When It's Time to Repair Windows
If your windows require repair, it's important to be careful when working. First, wear a pair of cut-resistant gloves and safety goggles to prevent glass shards from cutting you during your work.
Applying a plastic covering over the crack is a simple solution for a window that has cracked. This will prevent snow, rain, and insects from entering your home.
Glass that has cracked
Glass that is cracked not only make your home appear less appealing however, it could also let drafts and other elements into the home. It doesn't matter whether the cracks result from an impact like a baseball or soccer, or stress, like the sudden temperature drop, but it is essential to have them repaired as quickly as possible to avoid further damage and to keep your windows functioning effectively.
If your window is damaged but not broken, a simple solution is to apply clear tape to cover it. It's a cheap and simple solution that will provide some protection from dust, water, bugs and other debris and also keep out the elements.
If the crack is severe or appears to be getting worse, it's recommended to consult an expert. A skilled glazier will be able to determine the root of the problem and recommend an appropriate repair procedure.
Impact cracks are the most common window cracks. They typically occur when a sharp object is thrown at your window with enough force that it breaks. The cracks typically have a starburst of lines and broken pieces. They can be dangerous if they become loose. This crack can compromise the gas that is between the panes of your double-pane windows and decrease its energy efficiency.
Stress cracks are a different kind of crack that develops over time as a result of extreme temperature changes and other environmental factors. The cracks start around the edge of your window, and can progress to full-blown cracks.
A more serious but still feasible crack is one that is a pressure crack. It's usually a curvy line that runs across one or more sides of your window. It can be the result of low or high air pressure, which can lead to expansion or contraction of the glass.
There are other products that can be used to repair cracks in windows when you're willing to go beyond tape and nail varnish. Glass Repair Film, while more expensive, will give your windows more protection and durability. If you'd prefer to go the DIY method, epoxy is a strong adhesive that can fill cracks to prevent further damage and make your window appear like it never had a crack at all!
Leaking Windows
If you notice a damp spot under your window or that the wood surrounding it is weak or rotting, it might be the time to fix your windows. Mold and mildew thrive in excess moisture, which can lead to numerous issues in your home. They can lead to indoor air pollution, sagging walls, and even increase the severity of allergies. If left unchecked, they can cause structural damage to your home.
It's best to call an expert if the water is visible or coming from the outside. Don't ignore leaking windows. They're a major cause of structural damage and mold.
In many cases, caulking can be used to stop leaks. You'll need to carefully clean the area first, but you must also remove any old caulking before applying new caulking.
Check the weepholes on the frame for debris. They're designed to drain excess rainwater, but they could become clogged with insect corpses and other debris over time.
Check the seal between your double-paned windows and the frame. This will help maintain a seal between the glass panes and make windows more efficient. As time passes, the seal can get worn out and let water into your home.
Another sign of leaks is the appearance of water stains on the ceiling and walls. They occur when the drywall is saturated with moisture which weakens the fibers and leads to discoloration. You might also find peeling paint caused by the effects of the water weakening its adhesive properties and pulling away from the wall.
Faux Muntins & Mullions
In the past, mullions and muntins (or glazing bars in the UK) separated and held panes of glass in traditional multi-pane windows. After WWII, larger expanses glass with tempered were made available. They're used only as a decorative element in some older homes.
Sometimes it is the case that a small or even a single group of these wooden supports can be damaged by wind or rain leaving cracks in the window. Repairs can be made to the majority of these brittle or rotting elements.
Clean the affected areas with a cloth and an ammonia-based cleaner that won't leave any residue. Remove any loose or rotting parts and use an exacta-knife cut the intersections between the horizontal and vertical painted window muntins. After you've trimmed the intersections, you can tape off the lower portion of the window frame with painter's tape. Then, window repair can apply a thick coat of white paint, paying particular attention to areas which were lightly coated on the first pass. Allow the paint to dry completely before removing the tape and applying another coat.
If the problem is more serious, such as an hourglass-shaped fracture in the middle of the window, it's better to replace the sash. In these instances, you'll need to look for a replacement that is similar to the existing window in both style and size.
Installing a grid window is a less expensive option. These windows are made of a full glass pane, with a set of muntins, which are glued to the surface. This gives them a divided appearance. These windows aren't as energy efficient as traditional windows.
Installing a drip cap can stop water from entering the window frame. You can find a variety of these drip caps made of aluminum at most home centers for about $20. They're much simpler to install than windowsash replacements, and they'll provide you with the same function as a genuine mullion or muntin.
Broken Sashes & Frames
A broken window sash is an obvious indication that it's time for some help. If it's not checked, a damaged sash could cause wood rot, water leaks and more serious problems with the frame and sill. If you've broken a sash you should replace it as soon as you can to ensure that your window is properly sealed and operating.
The issue is usually caused by worn-out or poorly installed cords. It is easy to replace these cords in the majority of double-hung window models. You'll first need to remove tabs made of metal that hold the sash. To do this push up on one side (it doesn't matter which) of the sash then pull it towards the opposite side to remove it from the window frame. It is important to remove the strip that divides the sash from the other to allow access to the area where the sash cords are.
After you've removed the sash, you must take the time to look at its metal tabs and compare them to the ones on the new sash. If they are different it can be difficult to put the new sash in its correct slot and could impact how the sash operates. Luckily, this is easily rectified by placing tabs in the correct places on your new window.
In addition to the sashes, you'll also need to check the frame of your window for damage or decay. It's a good idea to do regularly, as wood will shrink and wear down as time passes. You should fix any visible damage as soon as possible to avoid a larger problem.
If your window frames have deteriorated they can be treated with a homemade preserver made from half mineral spirits and boiled linseed. After the treatment has dried, you are able to refinish your frames with high-quality latex paint. A new coat of paint will aid in protecting your window from the elements as well.