The Window Repair Case Study Youll Never Forget

Window Repairs
Window repairs can save homeowners money and keep their homes warm. In the event of serious damage, such as broken glass or a shattered frame, a window replacement could be necessary.
Many other problems can be fixed to extend the life of windows. The most frequent issues are:
Broken or cracked Panes
If it's an unintentional rock that was tossed by your lawnmowers or a tree's branch blown by high winds, damaged windows are not just visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air into your home. Luckily, it's typically easy to repair windows that have cracked panes.
Start by carefully removing glass with gloves and safety sunglasses. You may have to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood with a soft cloth or paper towel.
After cleaning the area, apply a silicone caulking that is water-proof to the frame's perimeter. This will prevent water from getting into the frame through the cracks and result in further damage.
A bad crack in double-paned glass can cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is significant enough to threaten the integrity of the glass or if you have an inner pane that's totally missing, it's time to contact an expert.
Cracks caused by thermal stress can occur when there's an extreme temperature difference between your home and the outside. The glass is then able to expand and shrink. If the cracks are on two sides of a window it is recommended to replace it instead of attempt to repair it.
If your windows are cracked and not yet ready to be replaced Clear tape can do a good job of securing the crack and keeping out bugs and cold air. You can cut a piece of nylon stocking or tarp large enough to cover the crack and stick it to the wall using duct tape. It's not a solution that will last forever, but it works well in a pinch and it keeps cold air and insects from entering your home. If you notice cracks or blemishes on your older windows You should consult your local company to see whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is one of the most frequent problems that plague windows. It can damage a home's appearance and create a security risk. However, it is possible to repair rotted wood. The first step is to ensure that the root of the rot has been dealt with. Examine for leaks in the roof and other areas where water can enter the wood.
The next step is to take out any rotten parts of the window frame. This can be accomplished with the use of a chisel, rasp or claw hammer. After you have removed the decayed wood, you'll need replace it with new wood. Pre-treated wood is recommended for this project since it will resist decay. If you are not able to replace the wood that has been damaged then you can use filler or wood hardener to help strengthen the damaged area. This kind of product can be available at a majority of hardware stores. To achieve the best results, make sure you follow the instructions on the product label.
After you have repaired the damaged areas of the window sill, it is important that you protect the area. This can be done by applying a waterproof wood sealant. A product like Sikkens is an excellent option for this job.
Use a two-part epoxy in order to protect the wood against further damage. It is easy to apply and leaves a beautiful finish. It is crucial to follow the directions on the label. Once the epoxy filler has dried, you can sand down the surface of the wooden. Start with a rough sandpaper then move to more smoother grades.
The last thing you would like to do is make the rotted area even worse by expose it to more water. Therefore, it is a good idea to cover the area that has been repaired with an oil-based primer which will protect it from moisture. After window repair near me , you can apply the wood sealant, which is waterproof.
Won't Open
There are many reasons why windows won't open. Wood frames can warp when exposed to rainy weather, or the house might have sunk or someone could have nailed it shut for security reasons. With a bit of patience and the right tools you can unlock most stuck windows.
One of the most common reasons for windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Acme Glass notes that dirt and grime builds up over time on sliding tracks, hinges and locks. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent the oxidation process and ensure that your window is working well.
Stuck windows may be the result of a loosening or breakage of the pulleys that are used to lift and lower the window. These components can lose their tension and cause obstruction particularly when the window is two or more stories higher than the ground.
If you're having trouble opening the window, try using a pry bar to gently force the window to open a bit at one time. Put a piece of wood on the frame to give your pry bar more leverage and be careful not to scratch the window or wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.
A broken spring could be the reason for a window that won't raise or lower. Based on the manufacturer of your windows, you'll have to consult the manual of your owner for additional instructions.
If you've tried cleaning and lubricating the moving parts on your windows, but they aren't opening, it's time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows slide from functional to unusable, as windows that aren't properly closed can leave your home vulnerable to water damage and burglary. Contact our team today to learn more about our replacement windows as well as our services!