15 Reasons Why You Shouldnt Overlook Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is a great investment in energy efficiency. It helps prevent loss of heat in the winter months and helps keep your home cool in summer. Repairing your double-glazed windows whenever required is a great method to keep them in good condition.
Over time, condensation and misting can affect your double-glazed windows. Double glazed windows may become difficult to open and close.
Broken Panes
A stray ball, a flying pebble from your lawnmowers or even a storm that is heavy could break the double panes of your windows, leaving your home exposed to the elements. Although a cracked glass window is difficult to repair but it doesn't have to be replaced. In fact the insulated glass between the two panes is in good condition and you can fix your double-pane window with a bit of DIY effort.
You'll first need to remove any broken glass from the frame. You'll need to be cautious to keep glass shards from falling to the floor or falling off the frame. Wear work gloves to protect your hands, and place an abrasive cloth around the damaged glass area to prevent further cuts or damage. After you have removed the broken glass clean the frame of the window thoroughly to get rid of any sealant or other debris. It is essential to smooth rough areas of the frame to create a smooth surface for your new glass.
After cleaning the frame and removing the dust, you can apply another layer of glass to the seam where you removed the broken pane. This is the best way to seal and protect your window, and will save you money by preventing water and drafts from entering the home. Next, you will need to choose the right glazing material. There are a variety of options such as clear tape, which is more durable than regular tape and helps prevent further cracking of your window or glazing film which is similar to clear plastic wrapping. This choice has the benefit that it can be painted to match your frame and can also shield your windows from rain and ice.
No matter what material you choose, it's important to press the glazier's points into the gap where the putty meets your frame. These will hold the new glass in place and help it adhere to the frame. Glazier's points can be found in hardware stores, and they come in pre-made ropes that you simply roll onto the frame rabbets.
Condensation
Double glazing can be susceptible to condensation issues and if you experience this issue, it is best to contact the company that provided the window. Many companies offer warranties and guarantees that will cover these issues. Fogging and condensation between panes of glass is a clear indication that the seals between your windows have been damaged and must be repaired by an expert who will fix both panes.
This procedure is a bit complicated and requires special tools to take off the old one and replace the new one, but it can be accomplished by an expert who will supply the necessary equipment. Making use of these tools can be dangerous, so it is always recommended to leave this kind task to a professional.
If you do decide to do it yourself, make sure you wear safety glasses and gloves to protect yourself from any broken glass pieces that may fly off during the process. It is also essential to carefully remove all putty and metal glazing points from the grooves in which the new window will be. You should also brush the frame with wire, and then vacuum or wipe it clean with a damp cloth. Once the frame is dry and clean you'll need to get a replacement glass that is 1/8 inch smaller in each direction than the window that you have and then fit it into the grooves.
Based on the frame you have depending on your frames, you'll need to apply a thin layer of silicone caulk to the grooves in order to ensure that your new pane is secure in place. After the silicone caulk is dried and cured, you can smooth it out and make any adjustments. Then the wood molding can be reinstalled.
If the weather suddenly changes, double-glazed windows may become difficult to open or close. Extreme temperatures can cause the frames to shrink or expand and this can make them fall or stick. You can try wiping the frames with water and then lubricating them when this happens however, it's better to seek advice from the company that installed your windows.
Misted
Misted Double Glazing is a problem with windows that develops when moisture gets trapped between the glass panes of your double-glazed windows. Double glazing is comprised of two glass panes that are separated by an insulating space, typically filled with argon gas to provide improved thermal efficiency. This creates an airtight sealing that keeps warm air in, and cold outdoor air out.
The seal may be damaged over time, and moisture can build up between the panes of glass and cause them to become to appear misty. This happens because the space between the panes is heated by the sun, causing water vapour to develop within it.
This is a normal occurrence however, if it occurs between the window panes it can be a problem since it is no longer able to control the temperature in the room, and allows the outside temperature to affect the indoor temperature. If you notice your double glazed windows are becoming misty, call in the experts at Northfield Glass to investigate.
We can replace a single sealed unit, without needing to replace the entire window. This is much less disruptive than a complete replacement. Our misty window repair involves taking off the glass unit, washing it, and then replacing it with a fresh one to create an watertight seal.
Some companies in the field claim to inject chemicals through holes drilled into windows with mist to remove the condensation and fog. We do not suggest this method. This is not only ugly, but it could also harm your toughened glass leaving you with a window that isn't functioning properly.
It is crucial to resolve the issue as quickly as you can, because if left untreated, it can lead to mould growth which can not only damage the window but also poses health risks to your family members. The moisture in the window may also lead to other problems in your home like damp or rot. In certain cases the window might need to be replaced completely.
Blown or Failed
Double-glazed windows consist of two glass panes with an air or inert between them. This helps to improve their thermal efficiency by keeping heat in and cold out. As time passes, the gas may depressurize which can lead to a range of problems.
One of the most frequent is condensation between the panes. While it is a natural occurrence and doesn't mean that your window is damaged but it could be an indication that you need to re-seal your windows. Condensation could also be a sign of a broken double glazing, which could require re-installation.
Double-glazed windows may also cause draughts. This could be due to the seal being damaged or handle that is broken, or a broken lock. A draught can be obvious and result in more expensive heating bills It is therefore essential that you get this fixed sooner rather than later. You can test the seals by placing your finger around the edges of the window frame to see if you feel any cold air.
You will also notice water beads on the inside of windows if your window seals aren't performing as they should. This is a sign that you should re-seal your double glazed windows.
Your window frames are designed to move a little bit as they have to do to keep the glass sheets in their place. However, over time, this special packaging material may be compressed and cause the seal to break. This will allow air to circulate between the panes, reducing your window's energy efficiency.
Double glazing that has blown an air seal is an indication of failure and should be repaired immediately. A damaged seal will stop your double glazing from fulfilling its primary purpose of keeping cold out and warm inside. A blown seal could let moisture in your home, which can lead to mold and other unpleasant conditions. It is recommended to contact a specialist in double glazing repair when you notice a blown seal on your double-glazed windows, as they can replace the entire unit.