The Window Repair Case Study Youll Never Forget

Window Repairs
Window repairs can save homeowners money and help keep their homes comfortable. Window replacements may be required in the event of serious damage like broken glass or a broken window frame.
But many other issues can be fixed to prolong the lifespan of your windows. The most frequent issues are:
Cracked or broken panes
Whether it's an errant rock thrown by your lawnmower or a tree branch that has been blown by high winds, damaged window glass isn't just ugly, but it can also result in more expensive electricity bills because the broken pieces let cold air to enter your home. It's relatively easy to repair windows that have broken panes.
Start by carefully removing glass with gloves and safety sunglasses. You may need use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the wood of the frame with a soft cloth or paper towel.
After cleaning the area, apply a silicone caulking that is waterproof to the frame's perimeter. This prevents water from getting in through the crack, which can cause further damage to the frame and the glass.
A bad crack in double-paned glass can compromise the gas between the panes, making your windows less insulative. If the crack is severe enough to cause damage to the quality of the glass or in the case of an inner pane that's totally missing, it's the time to call a professional.
Thermal stress cracks may also occur when there's an extreme temperature difference both inside and outside your home. The glass is then able to expand and contract. If the cracks are situated on two sides of a window it is best to replace it instead of try to repair it.
For windows that have cracked but aren't quite ready to be replaced Clear tape can do a great job of stabilizing the crack and preventing the entry of bugs and cold air. You can also cut the length of a nylon stocking to cover the entire crack and then glue it to the surface with duct tape. This is not an end-to-end fix, but it will keep insects out and cold air away from your home. If you notice cracks on your windows that are older it is recommended to contact the local company to determine whether replacing the entire window is a better option.
Rotten Wood
Wood rot is one of the most frequent issues with windows. It can degrade a house's appearance and create a safety hazard. However, it is possible to repair wood that has rot. First, you need to ensure that the root of the rot has been taken care of. This can be done by checking for roof leaks or gutters that are not functioning or cracked caulking, as well as other areas which allow water to penetrate the wood.
The next step is to get rid of any rotten areas of the window frame. This can be done using a rasp, chisel or claw hammer. Once the rotten areas have been eliminated, you will need to replace them with fresh wood. Pre-treated wood is recommended for this project, as it is resistant to decay. If you cannot replace the timber that has rotted you can apply wood hardener and filler to reinforce the damaged area. The majority of hardware stores carry this type of product. To get the best results, adhere to the directions on the label.
Once you have repaired the rotten areas of the windowsill, it's important to protect the repaired area. You can do this by applying a waterproof wood sealant. Sikkens for instance, is a great product to use.
Make use of a two-part epoxy to protect the wood against further damage. It is easy to apply and gives a good finish. However, it is important to adhere to the instructions for application on the label. After the epoxy filler dries, you can sand down the surface of the wooden. Start with a rough sandpaper, then move on to an easier grade.
The final thing you want to do is make the rotted area even worse by exposing it to more water. It is a good idea therefore, to cover the repaired surface with an oil-based primer that will protect it from moisture. After that, you can apply the wood sealant that is waterproof.
The W won't let you open
A window that isn't opening could be due to various reasons. Wood frames can warp when exposed to rainy weather, or the house may have settled or someone could have nailed it shut for security reasons. With a bit of patience and the right tools, you can open the majority of stuck windows.
The accumulation of gunk or debris can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges, and locks. Additionally, metal hardware is prone to get rusty when in contact with humidity or direct sunlight. Maintaining Get More Information lubricated by spray grease can prevent oxidation and keep your window functioning correctly.
Stuck windows may also be the result of an unintentional break or loosening of the pulleys used to lift and lower the window. These components may lose tension and become obstructed especially when the window is situated two or more stories above the ground.
If you are having difficulty opening a door, use a pry-bar to gently open the door. Place a block of wood on the frame to give your pry bar more leverage. Also, be sure not to harm the window or wood. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.
Another common issue with windows that don't open is a defective spring that stops the window jamb from lowering or rising. Depending on the manufacturer of the windows, you'll be required to refer to your owner's manual for further instructions.
If you've tried cleaning the moving parts of your windows and lubricating them but they're still not opening It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows slip from functional to inoperable, as windows that aren't properly shut could leave your home vulnerable to water damage and burglary. Contact our team today to learn more about our replacement windows as well as our services!