Repairs To Upvc Windows 11 Things Youre Forgetting To Do

Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.
It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.
Single-pane windows are relatively easy to replace and typically fit into frames of the past easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case, you will need to locate some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.
If you're planning attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled under.
It's a good idea to tape the gap once the glass has been removed. This will prevent water and drafts from entering your property until a professional is able to fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is large, you may be interested in the security door with an integrated window, since it will provide the best of both worlds.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are sliding.
Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you're satisfied with the size of the window, you can tighten screws to keep them in place.
If you are unable to move the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
UPVC handles can also become loose. Often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. The first step is to close your window and do a test fit. Our Home Page of the sash need to be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.
3. Water Leaks
If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or missing.
This is a relatively easy fix that can be done by any skilled DIYer. Based on the severity of the issue the caulking used previously may need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.
It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.
Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.
It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and open in a breeze it could be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.
Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is essentially a very simple procedure, but it is easier to do if you have someone to assist in holding the frame in place.
Make sure that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrow on each hinge. This shows which way the window should open.
The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you advice.
It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, causing gaps where the sash meets frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it may be possible to just give them a good clean, but in certain cases, it may be necessary to have them replaced.
These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.
Lastly, one of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking cold air.
With a little regular maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them instead of fixing them. So, if you are having issues with your upvc windows, it's best to seek professional assistance as soon as possible.