Repairs To Upvc Windows Isnt As Tough As You Think

Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.
Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good repair.
For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to source some plastic spacers that will help the new pane to fit perfectly into the window frame.
Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.
Once the glass is removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the window and the door is significant, you may want to use a security screen that also includes a window. This will give you the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they are susceptible to a range of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.
To repair a window that is sagging, you can try to reposition the hinges. First, my explanation 'll need to unblock the windows to get at the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.
If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.
uPVC handles may also loosen. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and then perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.
3. Water Leaks
It is essential to act if you get up each morning to discover mouldy walls and wet floors. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and reduce your energy efficiency.
Check that any drainage holes have no debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.
Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.
If the leakage occurs between the double-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and blow open with ease it could be hinges at fault. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.
Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is an easy procedure, but it is easier when you have a person to help hold the frame in place.
It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should open.
Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to offer assistance.
It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also decreases the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by different things. The hinges can also be disaligned as a result of wear, creating gaps between the frame and sash. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could be disaligned. It is located on the hinge side and may need to be cleaned. In some instances it is possible to replace these.
The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.
Another, and most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be placed on the windowsill on top. They will help stop cold air from entering and keep your home warm and cozy!
With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and they may reach an point at which it is more economical to replace them than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.