3 Common Reasons Why Your Double Glazing Lock Repairs Isnt Working And How To Fix It

Double Glazing Lock Repairs
Quality locks on your doors and windows will help prevent burglars from gaining entry into your home. They don't usually like breaking glass or trying to get through windows that are open.
Some double glazing owners, however, have had issues with their door or window lock after the installation. These issues can be fixed without the need for a new double glazing.
Broken or Faulty Locks
If your uPVC window or door lock is damaged or broken or has a problem, a locksmith will fix it for you. They can repair the striker plates, hinges, and locks on your double glazing. They can also move the cylinder in order to fix any misalignment which could cause your handle to function properly.
The mechanism could be seized when the key is inserted into the lock, but it will not turn or be difficult for you to insert. This can be due to dirt or grime getting stuck inside the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate it. It is important to use a dry lubricant, like graphite or teflon, rather than oil, which attracts dirt and stick to the interior of the mechanism. After lubricating the lock you need to insert the key and then try to turn it. The lubricant should work its way into the mechanism, and the lock should spin effortlessly.
A faulty lock can also be caused by loose screws within the mechanism of the lock. They may loosen, fall out, or even break completely, preventing the lock from being able to perform as it should. double glazing repair near me is a tool to tighten these screws however, care must be taken not to tighten them too much, as this can damage the internal components.
A faulty lock is dangerous for your family and you. This is especially relevant if you have young children. They can open the door without your knowledge, giving them access to your house. If you're concerned that this could occur, a licensed professional locksmith can help re-secure the double glazing doors.
double glazing repairs are a professional uPVC and double glazing company in Lancing that can fix any type of defective and damaged mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always required.
Broken or Faulty Handles
As part of their overall security package many double-glazed windows have a multipoint lock. This is a great option for those worried about opportunistic thieves looking to gain access to your home. Ask your installer about antilift blocks. They can be put in alongside your existing locks and ensure that your windows are securely shut.
Handle locks can be damaged or fail. They are the first part that criminals employ to open your window. Luckily, the good news is that this is among the easiest parts to repair.
Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette that is designed to resist forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional feature on all new double-glazed windows.
If a handle is damaged, it's important to get this repaired as quickly as possible. Faulty handles may prevent the window from closing properly and allow drafts to enter. It may also be a weak point that burglars who are opportunistic might exploit, putting your belongings and family at risk of being taken.
To repair the broken mechanism, you must first access the window frame, then take off the damaged handle. The gearbox that opens the handle is then located and the model is identified so a replacement can be sourced which matches the profile of the internal window frame mechanism.
Once the mechanism is replaced the handle can be fixed using the original screws - however, we generally recommend replacing them with larger ones because this will ensure the most secure fit. The final step is to apply a coat of clear sealant in order to protect the handle from further corrosion. After that your window will be operational again, and at only a fraction of the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows aren't shut properly, draughts can enter your home, the security measures will be compromised and you run an increased risk of damp or water damage. Window hinges that fail or fail to function properly are a common occurrence and can be fixed easily.
If you have a uPVC windows that won't open or close and close, it's likely that your hinges are damaged or broken and need to be replaced. A lot of window manufacturers will require you to purchase a new window unit to fix this simple issue, but we are able to replace the hinges to save you money.
Window hinges can often break after repeated use, or they might be damaged due to corrosion over time. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This means not causing the window to open or close.
You can locate the appropriate parts for your hinge by identifying its type. Common types of window hinges include Maco, Mila, Roto and many other brands. It's best to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.
The hinges that are not working properly can cause big issue for your uPVC windows and doors. They can be a major source of noise, and can also permit water to get into your windows.
Verify whether the pin barrels on both hinge halves are aligned. If it's not then tap the head pin using the hammer to create a shallow bend in the hinge barrel. This will help to keep the pin in the right position. Then, ask a friend to hold the door while you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges and then install screws using glue. After the glue is drying, put a secure hold on the hinges using weights or clamps.
Once you have repaired your hinges, you are able to put the door back in place. You can also reattach the handle. It is recommended to replace the screws using the same length of wood dowels as the original screw, so that they are in line with each other.
Glass that is damaged or damaged
uPVC Windows can be damaged over time, despite the fact that they are great at keeping cold out and conserving warmth. This can be the case with damaged or broken glass and defective locks. If left unattended, this can turn into a major expense. It can also affect the appearance of your home and could lead to a loss of insulation, so it's important to repair any damage as quickly as you can.
If the glass is cracked, but not broken it is possible to fix it yourself with the proper tools and methods. First, ensure that the area around the glass is clear so that any shards won't harm anyone and aren't a trip hazard. Then, remove any broken glass pieces and dispose of them in a appropriate way. Then, place masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-pane window it's best to pre-fit the pane of glass before glueing it back in place to ensure that you'll have enough space finish the project.
Before applying the glue, clean the surface of the broken frame and the glass with a an unclean, dry cloth. Follow the curing and application instructions that may differ from one product to the next. Based on the direction of the crack, you may need to hold the glass in place while it is curing. You can do this using lightweight clamps designed to hold delicate materials.
Once the adhesive has fully set, carefully place the glass into the window frame. Make sure that it is aligned with the frame's edge and that there aren't gaps between the glass sash as well as the frame. Avoid bending the glass as you install it again because this could weaken the seal. This could lead to condensation or water infiltration.
Contact a professional glazier like O'Brien(r) for an exchange if your glass window is completely shattered. It's important to act quickly if you have broken glass.