This Weeks Best Stories About Double Glazing Lock Repairs Double Glazing Lock Repairs

Double Glazing Lock Repairs
Having quality locks on your doors and windows helps to prevent burglars from gaining access to your home. They don't usually like to break glass or attempt to squeeze through open windows.
However, some double glazing owners have encountered problems with their door or window lock after it was installed. These issues can usually be fixed without the need for a new double glazing.
Broken or faulty locks
If your uPVC window or door lock is damaged or broken and requires a locksmith, they can fix it. They can repair hinges, striker plates, and locks for your double glazing. Article can also adjust the cylinder in order to correct any misalignment that may be causing your handle to operate correctly.
If the key fits inside the lock but it won't turn or is difficult to insert the mechanism could be locked up. This can be caused by grime or dirt getting stuck within the mechanism. If this is the case, it is possible to clean the lock and lubricate it. It is essential to make use of a dry lubricant such as graphite or teflon, rather than oil, which can attract dirt and adhere to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant needs to be absorbed into the mechanism, and the lock should be able to turn easily.
A malfunctioning lock could be caused by loose screws within the mechanism of the lock. They can become loose and fall out or even break off completely preventing the lock to perform as it should. The screws can be tightened with a screwdriver, but be careful not to over tighten them. This can damage the internal components.
Article is dangerous for your family and you. This is especially the case if you have children. They can easily unlock the door without knowing which gives them access to your house. If you're concerned that this could occur, a licensed professional locksmith can assist you re-secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific requirements, meaning that in many cases replacement windows and doors are not required.
Handles that are broken or damaged
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great option for those who are worried about burglars who are opportunistic and trying to gain access to their home. It is also a good idea to ask your installer about anti-lift locks, these can be fitted on top of the locks already in place and will keep your window locked in a closed position.
Handle locks are often damaged or fail. They are the first part that criminals employ to open your window. Luckily, the good news is that this is among the most straightforward parts to fix.
Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette which is designed to resist forced entry. This security upgrade is available as an option for new uPVC windows. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional option on double-glazed windows.
It is essential to fix handles as quickly as possible if it is damaged. A damaged handle can stop the window from closing properly and allow drafts in. It may also be a weakness that opportunistic burglars could exploit, therefore placing your home and belongings at risk of being taken.
The process of repairing the damaged mechanism begins with gaining access to the frame of the window and removing the broken handle. The gearbox can then be accessed to identify the type of gearbox that is used to open the handle. This allows an alternative that is compatible with the profile and the internal window frame mechanisms.
After the mechanism has been replaced the handle can be put back together using the original screws. However, we suggest replacing them with longer screws as they will provide the most secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further corrosion. After this step is completed, your window should be functioning again at a fraction of the cost of replacing it.
Hinges that are broken or Faulty
If your windows do not close properly, you may experience draughts, a weakening of your home's security, and an increased risk of damp or water damage. Broken or faulty window hinges are a common issue and can be repaired easily.
If you have a uPVC windows that isn't able to open or close and close, it's likely that your hinges are damaged or broken and require replacement. Most window companies will require that you purchase an entirely new window unit to resolve this problem, but we can replace the hinges to save you money.
Window hinges can often break from repeated use or they might be damaged through rust over time. If you've broken a window hinge, it is essential to take steps to avoid further damage. This includes not causing the window to close or open.
Knowing the type of hinge you have will help you identify the correct parts to fix it. Maco, Mila and Roto are all window hinges. Talk to a professional before purchasing parts that will not fit into your existing hardware. This could cause further damage.
A damaged hinge can be a major issue for your uPVC window and doors. They can be a significant source of noise and can also allow water to infiltrate that can cause damage to your windows.
To fix this issue, first verify whether the pin barrel on both hinge halves is aligned. If not then tap the headpin using a hammer in order to make a slight bend in hinge barrel. This will help to keep the pin in the right position. Ask a second person to hold the door while you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges and then install screws with glue. Finally, while the glue is drying, fix the hinges by using clamps or weights.
After your hinges have been repaired after which you will be able to re-install the door and then reattach the handle. It is recommended to replace the screws using the same length of dowels as the original screw so that they match up with each other.
Glass that is Broken or Faulty
While uPVC windows do an excellent job of keeping the cold out and heat in, they can become damaged over time. This could include cracked or damaged glass as well as defective locks. If neglected, this could turn into a major expense. It can also hurt the appearance of your home and can cause a loss of insulation. It is important to fix any damage as soon as it occurs.
If the glass is broken but isn't shattered it is possible to fix it yourself using the appropriate tools and methods. First, ensure that the area surrounding the glass is clean so that any shards won't harm anyone and aren't a trip hazard. Next, remove any broken pieces and dispose of them properly. Apply masking tape over the entire area. This will stop shards of glass from sticking to your skin and scattering when you move them. If you're dealing with a double-pane glass it's a good idea prepare the glass before glueing it back in place to ensure that you'll have enough space to complete the project.
Use a clean, dry cloth to wipe down the glass's surface and the frame before applying the glue. Follow the directions for application and curing that can differ from one product to the next. Depending on the degree of the crack you may need to clamp the glass while it is curing. You can do this using lightweight clamps that are designed to hold fragile materials.
Once the adhesive has fully cure, carefully insert the glass in the window frame. Make sure that it is flush with the frame edge and that there aren't gaps between the glass sash and frame. Be careful not to bend the glass when you install it again, as this could weaken the seal. This could result in condensation or water infiltration.
Contact a professional glazier like O'Brien(r) for an exchange if your glass window is completely shattered. If you leave broken glass unattended, it could cause danger to children and pets, so it's essential to act quickly.