Fitting a Cat Flap

It may seem difficult to set up the flap for your cat but with the right instructions it's not that hard. Firstly, determine how high you want the cat flap to be (on average, belly height). Then, mark this area on your door and then use the template provided to help you drill.
If you have a small kitten you can prop the door open very slightly and gradually push it to pass through. Reward it each time it goes through.
Measure the Door
A cat flap is a wonderful method to let your pet come and go into and out of your home as it pleases. This can help keep your cat healthy since it will ensure that it is getting enough exercise and be able to go back inside when it is stranded outside in bad weather. read full article can also cut down on the amount of time you need to let it out or in and can also protect your home by letting you know when it's been out.
It is important to make sure that the cat flap is set up correctly in order to prevent your pet from being pushed through or escaping through it by other animals (e.g. dogs). You should measure the height of your pet's stomach and the width of the doorway at your home to ensure the flap is at the right height. You can adjust the position of your flap in case your cat is smaller or taller than average.
Next, use a spirit-level to mark the center of the door. This is where you will put in the flap. With the markings as a guide, take a jigsaw and cut out the shape of the flap within the door. After you've cut the area and sanded the edges to create smooth surfaces. Make any holes that are required.
Installing a cat flap ought to not take more than two hours. However, the process can be a little more complicated when you have to install it onto the door of a uPVC or composite door as these doors come in various thicknesses, which affect how the holes are cut and what they are inserted into. We always suggest to contact a professional for your first experience with glass.
Measure Your Cat
A cat flap can spare you from hearing your pet's cries for you to let it out or in. This is especially helpful if you are at work all day and your cat has to stay in the waiting room until you come home in any weather.
If you're planning to put a cat flap on your door, it is crucial to take measurements of your cat prior to attempting the task. Although it might seem like an easy task, it is important to get the measurement right or your pet will find it very difficult to use.
Firstly, make sure your cat is calm and not stressed prior to taking the measurements. You'll need to put your cat in a place that they are unable to move. Also, make sure that the measuring tape is flat and not curved against the body. You can take a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.
Once you've got the measurement of your cat, it is time to look at the door and decide where to put the flap. A good tip is to place the flap on the highest point of your cat's belly as it will allow them to pass through it with minimal effort. This will also prevent the flap from making a lot of noise as it swings back and forth.
You should also take into consideration the thickness and structure of the uPVC door or composite. While all timber doors have the same thickness, uPVC or composite doors may differ in their overall design. This can make the process of putting in the flap for your cat more difficult since you have to make sure that the hole is of the correct size.
It is also worth looking through the instructions that come with the kit to locate an illustration template that can be used to mark out the position of the hole in the door. This will allow you to determine where the hole must be located and make sure that the template is set precisely on the door. Utilizing a spirit level to ensure that the template is sitting flush against the door will also be extremely helpful.
Cut the Flap
You'll need to cut an opening in the door to accommodate your cat flap before you can attach it. This can be a tricky job, and it is recommended that you seek the help of a professional cat flap fitting service to complete this task in case you don't have the expertise or knowledge to do it yourself. You can also consult the instructions that come with the kit to discover how to do it right.
To do this you need to determine the height of your cat or kitten's belly and use this as an indication point. As a general rule, place the cat flap around 10-15 centimeters higher than the ground. This is the average height of the cat's belly. cat flap cost near me will allow your cat to pass through the flap without difficulty and make it difficult for other cats or nosy neighbours to get inside or out.
Draw the location of the cat flap on the door using the pencil. If your kit comes with a template you can place it on the door. Use the marks on the template to drill holes at each corner. You should then be able to cut out the template's shape and replace it with your cat flap.
If you are installing your cat flap in the form of a door made of wood or uPVC, you can do it yourself if are confident enough to use the jigsaw. Make sure you don't cut into any of the door's mullions, or vertical rails. You can use a Jigsaw to cut your panel into a square or a circle depending on the way you'd like it. Be patient, and don't try to force the jigsaw to cut faster.
After the hole has been made, carefully place the cat flap into its new home. Make sure it's firmly secured. If the flap is fitted with screw caps, push them onto the protruding bolts. Once the screws are in place, sand any rough edges of the cut, and then seal any gaps to ensure there are no draughts coming into your home.
Fit the Flap
If you have a basic cat flap you can leave it open and encourage your pet to use it by putting a little bit of cat food on the outside of the door. You can also push the cat with sticks or your hand. Once your pet has become used to walking through the flap, it will be in a position to move at will. This allows you to let it in and out at any time it wants.
It is possible to fit an animal flap inside the UPVC or glass doors however it's not exactly the same as fitting it into a wooden exterior door due to the fact that the UPVC doors and some glass doors don't have the same thickness. This can have a dramatic effect on the way you cut the hole for the flap and will also affect whether the flap is fitted correctly after it has installed.
The mounting kit might include a template showing you where to drill holes. If the kit doesn't include a template, you are able to create one yourself. It's important to not push the jigsaw too in order to cut, so it doesn't leave a bigger than needed hole in your door.
Most cat flaps are square or rectangular in shape, however there are also some which are circular, and are typically more difficult to fit. If you have a round flap, make sure that the hole is located in the correct spot on your door. If not, your cat might not be able to use it, and may be outside all day (or at night).
Certain cat flaps come with locks that let you determine when your cat enters and leaves. These are useful for pets who are afraid of going out in the dark or returning to the house at night. They can also be helpful when you are working all day. Certain locks can be used to lock access or exit, and others can be locked both ways. This is beneficial for sick or older cats who aren't keen to go outside in bad weather.