15 Surprising Facts About Double Glazed Window Repair

Double Glazed Window Repair
Double glazing is a great investment in energy efficiency. It helps prevent loss of heat during winter months and keeps your home cool in summer. Restoring your double-glazed windows as necessary is a great way to keep them in good condition.
Over time, your double-glazed windows may experience issues such as condensation and misting. This can cause your double-glazed windows to be difficult to open or close.
Broken Panes
A stray baseball, a flying pebble from your lawnmowers or even a heavy storm can break the double panes of your windows and expose your home to the elements. While a damaged glass window is difficult to repair however, it does not need to be replaced. In fact the insulated glass between the two panes is still in good shape and you can repair your double-pane window with a bit of DIY effort.
You'll first need to remove any broken glass from the frame. This can be messy work and you'll need to be cautious to prevent any glass shards from falling on the floor or sliding out of the frame. Wear gloves for your hands and use an abrasive cloth around the damaged glass area to prevent further damage or cuts. After removing the broken piece take care to clean the entire frame of the window to get rid of any remaining sealant or debris. It is important to smooth rough areas of the frame to ensure a smooth surface for the new glazing.
Once the frame is cleaned and dried, you can apply a fresh layer of glass to the seam where the broken pane was removed. This is the best method to ensure your window stays safe and sealed, and it will aid in reducing energy costs by stopping drafts and water from getting into your home. Next, you will need to choose your glazing material. There are several options such as clear tape, which is more durable than regular tape and prevents further cracking of your window, or glazing film that is similar to clear plastic wrapping. This type of wrap has the advantage that it can be painted to match the frame of your window and will also block out the elements like ice and rain.
Whatever material you select, it is important to press the glazier's points into the place where the putty joins the frame. These will hold the new glass in place and aid it stick to the frame. The glazier's point can be found in hardware stores, and they are available in pre-made ropes that you simply roll out onto the frame rabbets.
Condensation
Double glazing can be prone to condensation issues and if you encounter this issue, it is best to call the company that installed the window. Many have warranties and guarantees to address the issues. Fogging or condensation on the panes of your windows is a sign that your seals are damaged. Only a professional can resolve this problem by replacing the panes.
The process is difficult and requires special tools to remove the old one and replace the new one, but it is possible to do this by an expert who will supply the required equipment. Using these tools can be dangerous, however it is recommended to leave this kind of work to an expert.
Wear safety gloves and glasses if choose to do it yourself. You may be exposed to flying glass fragments. It is also crucial to remove all putty and metal glazing points from the grooves in which the new window will be. Wire-brushing the frame or vacuuming it with a damp cloth is also recommended. When the frame is dry and clean then you'll need purchase a replacement glass that is 1/8 inch smaller in each direction than the existing window and test-fit it in the grooves.
Based on the frame you have, you will then need to apply a layer of silicone caulk to the grooves in order to ensure that the new pane is secure in position. After the caulk dries and is dry, you must smooth it and make any adjustments needed. The wood molding can be reinstalled.
If the weather suddenly changes, double-glazed windows could be difficult to open and close. Extreme temperatures can cause the frames to expand or shrink and this can make them sag or stick. You can try wiping down the frames with water and then lubricating them in the event that this happens however it is better to seek help from the company that installed your windows.
Misunderstood
When moisture gets trapped in between the glass panes, it can cause misted double glazing. Double glazing is made up of two panes, which are separated by a space that is filled with argon for better thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside and allows you to keep the temperature comfortable in your home.
This seal can fail over time, and moisture can build up between the glass panes, causing them misty. This happens because the gap between the panes is heated by the sun, causing water vapour to develop within it.
It is a natural phenomenon however, if it happens between the panes of the window it can be a problem because it won't be able to regulate the temperature within the room. Instead the temperature outside of the window will influence the temperature indoors. Northfield Glass can help you when your double-glazed windows begin to mist.
We can replace the blow-sealed unit without having to replace the whole window which is less disruptive than a full replacement. Our misty glass repair involves removing and cleaning the glass unit before replacing it with a new one. This creates a watertight seal again.
There are window repairs near me in the industry that claim to cut holes into your existing misted windows and inject chemicals into them that they claim will eliminate the fog & condensation, however, we do not recommend this procedure. This method is not only unattractive, but it could also damage the toughened glass and leave you with windows that do not fully perform the function it was intended to.
It is important to fix the problem as soon as you can, as if untreated, it can result in the growth of mould that not only damages the window, but can also pose health risks to your family members. The condensation in the window could also lead to other problems within your home, such as damp or rot. In some cases windows, they may have to be replaced completely.
Failed or blown
Modern double glazed windows have two glass panes that have an inert gas or air in between them. This improves their thermal efficiency, keeping heat in and cold out. Over time, this gas can become depressurised and cause a variety of issues.
One of the most frequently encountered is condensation that forms between the panes. Although it's a normal occurrence and doesn't mean that your window is failing but it could be a sign that you need to seal your windows. Condensation can be an indication that your double glazing has failed in which case it's time to get it replaced completely.
Also, look out for draughts that are coming from your double glazed windows. It could be due to a failure of the seal or a damaged handle lock. A draught is noticeable and will lead to more expensive heating bills Therefore, it is essential to get it fixed sooner rather than later. You can test the seals by feeling around the edges of your window frame to determine whether you feel cold air.
You may also see water beads on the inside of windows if your window seals aren't working. This is a sign that you need to replace the seals on your double-glazed windows.
Your window frames are made to move slightly, as they need to do in order to keep the glass sheets in place. In time, this special packaging material may become compressed. This could cause the seal to become broken. This will allow air to move between the panes, which will reduce your window's energy efficiency.
Double glazing that has ruptured seals is a sign of failure and should be repaired as soon as possible. A blown seal will prevent your double glazing from fulfilling its primary purpose of keeping cold out and warm inside. In addition, a blown seal will let your home's moisture in, which could result in mold and other unpleasant conditions. You should call a specialist in double glazing repair as soon as you discover a blowing seal on your double-glazed windows, since they could replace the whole unit.