The 10 Scariest Things About Double Glazing Lock Repairs

Double Glazing Lock Repairs
Quality locks on your doors and windows will help prevent burglars from gaining entry into your home. They aren't likely to break glass or try to squeeze through windows.
Some owners of double glazing, however, have experienced problems with their window or door lock after installing. Luckily, these problems are often fixable without having to buy new double glazing.
Broken or Faulty Locks
A locksmith can fix your uPVC window or door lock if damaged or is not working properly. They can repair hinges, striker plates, and locks for double-glazing. They can also adjust the cylinder to fix any misalignment that could be causing your handle to operate correctly.
The mechanism could be seized if the key fits in the lock, but it does not turn or is difficult to insert. The dirt or grease could get stuck in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate it. Make use of a dry lubricant, such as graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the mechanism's inside. After lubricating the lock, you should insert the key and attempt to turn it. The lubricant must work its way into the mechanism and the lock should be able to turn smoothly.
A damaged lock can be caused by loose screws within the lock mechanism. They may loosen and fall out or break completely, preventing the lock from functioning properly. try this can be tightened with a screwdriver, but you must be careful not to over tighten them. This can damage the internal components.
A broken lock can be hazardous for your family and you. This is especially relevant if you have young children. It is possible for them to unlock the door without you knowing and give them access to your home. If you're worried about this happening, then a vetted locksmith can provide rapid and effective service to re-secure your double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on both uPVC doors and windows. We can also alter the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always necessary.
Handles that are broken or faulty
As part of their overall security package, many double-glazed windows have a multipoint lock. This is a great choice for those who are worried about opportunistic burglars trying to gain access to their home. It's also worth asking your installer about anti-lift locks, these can be fitted on top of the locks that are already in place to will keep your window locked in the closed position.
It's not uncommon for the handles to be damaged or fail. They are the first component of your window that could be pushed open by criminals intent on breaking in. The good news is that this is one of the most simple parts to fix.
Modern uPVC and aluminium handles feature a multi-point locking system known as Espagnolette that is designed to resist forced entry. This security upgrade is available as an option with new uPVC windows. As an upgrade option, older aluminium or uPVC handles that are no longer in use can be upgraded to shoot bolt locking systems.
If a handle is damaged, it's crucial to get it repaired as quickly as possible. Handles that are damaged can prevent the window from closing correctly and also allowing drafts to enter. It could be a weakness that burglars with a plethora of opportunities might exploit, putting your belongings and family at risk of being stolen.
To repair the broken mechanism, first access the window frame and then remove the broken handle. The gearbox can then be accessed to determine the type of gearbox that is used to open the handle. This allows to replace the handle that matches the profile and the internal window frame mechanisms.
After the mechanism has been replaced the handle can be re-affixed using the original screws but we would recommend replacing them with longer ones because this will ensure an even more secure fit. The final step is to seal the handle using a clear sealant. This will shield it from further deterioration. After this step is completed, your window should be fully functional again at a fraction of the cost of replacing it.
Broken or Faulty Hinges
If your windows don't close properly, you may suffer from draughts or a weakening of your home's security barrier, and an increased risk of damp or water damage. Broken or defective window hinges are a frequent issue that can be fixed easily.
If you have a uPVC windows that won't close or open and close, it's likely that your hinges are broken or damaged and require replacement. While many window companies require you to purchase a new window unit to solve this issue, we're able to replace the faulty hinges and save you money.
Window hinges may break after repeated use, or they might be damaged by corrosion over time. If you have a broken window hinge, it's essential to take steps to avoid further damage. This includes not forcing the window to open or close.
Identifying your hinge type will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. Talk to a professional before purchasing parts that won't fit with your existing hardware. This can result in further damage.
Faulty hinges are a major issue for uPVC doors and windows. They can be a major source of noise, and they can also allow for water infiltration which could damage your windows.
Make sure whether the pin barrels on both hinge halves are aligned. If it's not tapping the headpin, use a hammer in order to create a slight bend in hinge barrel. This will help keep the pin in place. A friend can help you hold the doors as you take out hinge screws and hinges. Replace the hinges and install screws using glue. Finally, secure the hinges with clamps or weights until the glue sets.
After you have repaired the hinges, you can install the door again. You can also reattach the handle. Replace the screws with wooden dowels of the same size as the original screw to ensure that they match.
Broken or Faulty Glass
While uPVC windows do an excellent job of keeping the cold out and warm in, they may become damaged over time. This can include broken or damaged glass and faulty locks. This is an issue that can be costly when not addressed. This can also detract from the aesthetics of your home and lead to a loss in insulation. It is crucial to repair any damage immediately.
You can repair your cracked glass yourself if you have the right tools and techniques. First, ensure that the surrounding area around the glass is clear to ensure that any shards do not cause injury to anyone or are an accident hazard. After that, take away the broken glass pieces and dispose of them in a appropriate manner. Then, apply masking double glazing repairs to the entire area to stop shards from scattering and sticking to your skin when you move them. If you're dealing with a double-pane window it's a good idea fit the glass pane before glueing it back in place so that you know you'll have enough space to finish the project.
Use a clean, dry cloth to clean the glass's surface and the frame before applying the glue. Follow the directions for application and curing, which can vary from product to product. You may need to clamp the broken glass with lightweight clamps designed to hold fragile materials, based on the angle.
Once the adhesive is fully set, carefully place the glass into the window frame, ensuring it's flush with the edges of the frame and there aren't any gaps between the glass and the window sash. Be careful not to bend the glass when you put it back in place, as this could weaken the seal. This can lead to water infiltration or condensation.
Contact a professional glazier, like O'Brien(r) for an exchange if your glass window is completely shattered. If you leave broken glass unattended, it could cause danger to pet and children It's therefore essential to act quickly.