Fitting a Cat Flap

It can be difficult to install a cat flap, but with the right instructions, it's not too difficult. Determine how high you would like the flap to be (normally it's located at belly height). Note this on your door, and use the template provided to guide you when drilling.
If you have a kitten, or a young kitten, prop the door open a bit and gradually allow it to go through. Reward it when it goes through.
Take a measurement of the door
A cat flap lets your pet to enter and exit your home at any time. cat flap fitting near me can help keep your cat healthy since it ensures that it is getting enough exercise and be able to go back inside if it gets trapped outside in bad weather. This will cut down on the time you allow your cat out or in and also make your home safe by notifying you when it's gone.
It is crucial that the cat flap is properly fitted to stop your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). It is crucial to determine the height of your pet's belly as well as the doorway of your house so that you can make sure that the flap is at the right height. You can adjust the position of your flap when your cat is smaller or taller than average.
The next step is to utilize a spirit level mark the centre of the door that you will put the flap. Then, using the markings as an outline, cut the contour of the flap on the door with a jigsaw. After you've cut the area and sanded the edges to create smooth surfaces. Drill any necessary holes.
Fitting a cat flap should not take longer than two hours. cat flaps for french doors can be slightly more complicated if you are required to install it in the form of a uPVC door or composite one. This is due to the fact that these doors come in different thicknesses, which can affect the way holes are cut. This is why we recommend hiring a professional to carry out the job, particularly when you've never dealt with glass before.
Measure Your Cat
You can avoid hours of listening to the cat's meows to be allowed in or out. This is particularly useful for those who work most of the day and your cat has to stay in the house waiting for you to get home regardless of the weather.
If you're planning to put a cat flap inside your door, it is essential that you determine the size of your cat prior to beginning the task. It may seem like a straightforward task, but it is essential to get the measurements right. In the event that you don't, your cat might find it difficult to use.
First, make sure that your cat is calm prior to taking measurements. You'll need to put your cat in a place where they cannot move. Also, make sure that the measuring tape is flat and not curved against their body. You can get a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.
Once you have the measurement of your cat, it is time to take a look at the door and decide where you want to place the flap. It is advisable to place the flap in the middle of your cat's belly as it will allow them to get through it with minimal effort. This will also stop the flap from making a lot of noise as it swings back and forward.
It is also important to take into consideration the thickness and structure of the uPVC door or composite. While timber doors are of the same thickness, uPVC and composite doors are different in their overall design and can make fitting the cat flap more difficult since you have to make sure that the hole you cut is the right size for your pet.
It is also worth looking through the instructions included with the kit to find an illustration template that can be used to mark the location of the hole in the door. This will help you determine where the hole must be located and make sure that the template is placed correctly on the door. It is also a good idea to use a spirit-level to ensure that the template is flush against the door.
Cut the Flap
You'll need to make a hole in the door to accommodate your cat flap prior to you can install it. It can be a difficult job and it is recommended that you hire a professional to help you if you lack the skills or experience. It is also recommended that you review the directions that come with the cat flap kit to discover how to do this properly.
To do this, you will need to determine the height of your cat or kitten's belly. Use this as a reference point. In general, place the cat flap approximately 10-15 centimeters above the ground. This is the standard height of the cat's belly. Your cat will be able to go through the flap with ease and also give any other cats or curious neighbours difficult time trying to get in or out.
Once you've determined the location where the cat flap needs to be located, mark the position on the door with pencil. If your kit has a template, place it over the door. Use the markings on the template to drill holes at each corner. You should then be able to cut the design of the template and replace it with your cat flap.
You can install the cat flap yourself in an uPVC or wood door if you are confident using the use of a jigsaw. Be sure not to cut into the vertical rails or mullions of your door. You can use a jigsaw cut the panel into a square or a circle depending on the design of your cat flap. Be patient and don't try to force the jigsaw into cutting faster.
Once the hole is cut and the flap is firmly positioned, carefully place the flap of cat food into its new location and make sure that it is securely fixed. If it features caps on the screws, then place them onto the screws that protrude. Once the screws are in place, you can sand any rough edges of the cut then seal any gaps to ensure that there aren't any draughts getting into your home.
Fit the Flap
If you have a basic cat flap, you can leave it open and encourage your pet to walk through by putting a small amount of cat food in the front of the door. Alternatively you can try pushing the cat through using your hands or with a stick. Once your cat has become used to walking through the flap it will be in a position to move at will. This allows you to let it in and out at any time it's wanted.
It is possible to put a cat flap in an UPVC door or glass door, but it might not be as easy as installing one inside a wooden exterior door. This is due to the fact that the doors made of UPVC and some kinds of glass doors do not have a uniform thickness. This can have a major impact on how you cut out the flap hole and also how well the flap fits after installation.
Depending on the model of cat flap you pick It may include a mounting kit and a template that shows you exactly where to drill the holes for it. If the kit doesn't include a template, you are able to create one yourself. It is important not to press the jigsaw too hard when cutting, so it doesn't leave a bigger than necessary hole in your door.
Most cat flaps are rectangular or square in shape but there are also some which are circular, and are typically more difficult to fit. If you have a circular flap, it is essential to ensure that the hole is in the right position on your door because if it's not, your cat won't be able to use it and could be stranded out in the sun all day (or even night).
Certain models of cat flaps come with locks that allow you to regulate when your cat comes in and goes. These can be very useful in the event that you are worried about your pet going out at night only to come back in due to the darkness, or if you're at work all day. Certain locks can be used to lock access or exit, and others can be locked in both directions. This is beneficial for sick or elderly cats who do not want to venture out in cold weather.