17 Signs You Work With Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.
It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.
For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.
It's a good idea to tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may be interested in a security door that has an integrated window, as it offers the best of both worlds.
2. Sagging
uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.
Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.
If you aren't able to move the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.
uPVC handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.
3. Water Leaks
It is important to act if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce your energy efficiency.
It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.
Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.
It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and open with ease it could be hinges that are at fault. These are easily repaired by any skilled DIYer and are usually completed in just a few minutes.
Like all mechanical parts, hinges can wear out over time. It's very simple to change a window hinge however it is easier if someone else helps you hold the frame.
Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. Sending us photos via our website will often solve the issue. We are more than happy to offer advice.
Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by various factors. discover this , also due to wear and tear could become misaligned. This will cause a gap to form where the sash meets the frame. If they're beyond repair, it could be necessary to have them realigned. The interlock, which is located on the hinge of the window, can be misaligned. Again, it is possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.
The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and decrease draughts.
The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!
Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as you can.