Fitting a Cat Flap

It can be difficult to install the flap for your cat however, with the proper instructions it's not that hard. Firstly, determine how high you would like the flap to be (on average or belly height). Mark this point on your door and then use the template included to help you drill.
If you have a kitten, or a young kitten you can prop the door slightly open and gradually encourage it to enter. Reward the kitten each time it passes.
Take a measurement of the door
A cat flap is a great option to let your pet move into and out of your house as it wants. This can help keep your cat healthy by making sure that it is exercising as well as being able to get back inside if trapped outside in bad weather, particularly during the winter. This will reduce the amount of time you have to let your cat go in and out, and keep your home secure by letting you know when it's gone.
However, it is important that the flap on your cat is properly fitted to stop your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is essential to measure the height of your pet's belly and the doorway to your home to make sure that the flap is at the correct height. If your cat is taller or shorter than average, you can alter the flap's position by moving it up or down by a tiny amount.
The next step is to use a spirit level to mark the centre of the door where you will put the flap. With the markings as a guide, take the jigsaw and cut the shape of the flap in the door. After you've cut the area, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes required.
The process of installing a cat flap is not as complicated as you believe and it shouldn't take more than two hours to complete the entire task from start to completion. The process is slightly more challenging if you need to put it in the form of a uPVC door or a composite one. This is because these doors come in a variety of thicknesses, which can affect the way that holes are cut. This is the reason we recommend calling an expert to do the job, particularly if you have never worked with glass before.
Measure Your Cat
A cat flap can save you from listening to your pet's meow to let it in or out. This is particularly helpful if your cat is trapped in the house during all seasons when you are at work.
It is important to first measure your cat before you attempt the installation. While it may seem a simple operation it is essential to measure the right way or your pet will find it difficult to use.
First, ensure that your cat is calm before taking measurements. You will need to hold them in a way that they cannot move and also ensure that the measuring tape or ruler is flat against their body and not arching in any places. Holding the ruler or measuring tape against their body from the top of their head to the bottom of their tail can allow you to get an precise measurement.
Once you've figured out the measurements of your cat, it's time to look at the door and decide on where you want to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to pass through the door without much effort. This will also avoid the flap from making lots of noise when it swings open and shut.
You should also take into consideration the thickness and structure of the uPVC door or composite. While timber doors are of a similar thickness, uPVC and composite doors may differ in their overall design, which can make fitting the cat flap more difficult because you must make sure that the hole you cut is the right size for your pet.
It is also worthwhile reading through the directions included with the cat flap kit to locate an illustration template that can be used to determine the position of the hole in the door. This will allow you to see where the opening needs to be and also ensure that the template is correctly positioned on the door. Utilizing a spirit level to check that the template is right against the door will be extremely helpful.
Cut the Flap
Before you can install your cat flap, you'll need to cut the door panel in order to create a space large enough to accommodate it. This is a difficult job, and it is recommended to seek out the assistance of an expert cat flap fitter for this job should you not have the knowledge or skills to complete the task yourself. You can also refer to the instructions included with the kit to discover how to do it properly.
To do this you need to determine the height of your cat or kitten's belly and use that as a reference point. In general, place the cat flap about 10-15 centimeters above the ground. This is the standard height of the belly for cats. This will let your cat pass through the flap without difficulty and make it more difficult for other cats or naughty neighbors to get in or out.
Once you've decided the best location for the cat flap to be positioned, mark this location on the door using pencil. If please click the following webpage comes with an outline put it on top of the door. Use the marks on the template to drill holes at every corner. Then, you should be able to cut out the template and replace it with the cat flap.
You can install your cat flap yourself on the door made of wood or uPVC when you're confident with the Jigsaw. Make sure you don't cut into any of the door mullions or vertical rails. You can use a Jigsaw to cut your panel into a circle or square according to the way you'd like it. Be patient, and don't force the jigsaw into cutting faster.
Once the hole has been cut, carefully place the cat flap into its new home. Make sure it is solidly secured. If it has screw caps, then push them onto the screws that protrude. Once the screws have been installed smooth the edges and seal any gaps. This will prevent the entry of draughts into your home.
Place the Flap
If you have a standard cat flap, you can help your pet to use it by placing a small amount cat food on the top of the door. You can also try pushing the cat using a stick or your hand. Once your pet has become accustomed to walking through the flap it will be in a position to move whenever it wants. This allows you to let it in and out whenever it wants.
It is possible to fit a cat flap in the UPVC doors or glass door, however it may not be as simple as putting one on a wooden external door. This is because the doors made of UPVC and some kinds of glass doors don't have an even thickness. This could have an enormous impact on how you cut out the flap's hole, and how well the flap fits after installation.
Based on the type of cat flap you choose It could be equipped with a mounting kit and template that will show you exactly where to drill the holes for it. If the kit doesn't include a template you can use a photocopier to make your own. When cutting, More Bonuses to keep the jigsaw from being pushed too hard so that you don't create a larger hole than necessary in your door.
Most cat flaps are rectangular or square in shape, but there are some that are circular and these are typically more difficult to fit. If you have a circular flap it's essential to make sure the hole is in the proper position on your door, because if it's not, your cat will not be able to use the flap and may be stuck in the open all day (or even at night).
Some models of cat flap have locks which permit you to regulate when your cat comes in and goes. They can be extremely useful when you're concerned about your cat going out at night and coming back in because of the darkness, or if you're at work all day. The lock can be used to allow entry or exit, and some can be locked in both directions, allowing you to shut the door completely, which is particularly beneficial for sick or elderly cats who don't want to go out in the rain.