16 Facebook Pages You Must Follow For Car Keys RepairRelated Businesses

5 Tips For Car Keys Repairs
Modern car keys are complicated, and require professional repair services when they become damaged. This article will cover 5 tips for keeping your car keys in good condition.
Most of the time, issues with key fobs and remote controls can be resolved by replacing the battery. In other cases it is possible to reprogramme the device. Consult your owner’s manual or an expert for more specific instructions.
Battery Replacement
Many modern cars now feature remote key fobs that include keyless entry and remote start features, as well as a traditional metal car key. They are powered by small batteries that eventually wear out and need to be replaced. Fortunately this process is easy and can be completed by any auto accessory shop that has the proper battery type for the car model you have.
Refer to the owner's manual of your vehicle to determine what kind of battery is in use. Once you know what type of battery is in the key fob, head to an auto parts store near you to buy a replacement. In most cases, you can get the same battery for sale or even for free with an offer.
Once you have the new battery you can simply open your key fob and remove the circuit board by prying apart two of the seams using a screwdriver with a flat head or your fingernail (if you are careful not to press any thing). Next, locate the battery compartment and it will be easy to locate It will either be installed or have a plus or minus sign embossed on it. Place the new battery in carefully and make sure it is placed in exactly the same way as the original one.
Once the new battery has been put in, replace the circuit board and snap the two pieces of your key fob together. After it's reassembled, test out the buttons to ensure that everything is working as intended. The ID of the key fob won't be affected when the battery is replaced therefore the key fob should not require reprogramming after the repair. This is a huge benefit for those who want to save money and avoid expensive trips to the dealership or a locksmith.
Ignition Cylinder Replacement
Modern car key ignition systems are complex and require a precise sequence of movements before the engine can start. If something happens to interrupt that process, like a broken key cylinder, it can cause your car to start with no power. While it's possible to replace a key cylinder however, it's not an easy procedure. The ignition is an intricate, one-key system. It requires special tools and a careful lubrication.
First, determine if the ignition will turn in the accessory position and whether the key is properly inserted. This will help you identify the issue and determine a solution. If you are unable to turn the cylinder in any direction, refer to your owner's guide or contact an locksmith for assistance with the ignition.
If the cylinder rotates in the accessory mode, you can use the screwdriver to push the small anti-rotation switch on the bottom of cylinder. Then, rotate the cylinder until its retaining tabs and slots align and slide it out. If the cylinder doesn't move at all, or it's hopelessly stuck, you may have to tap it with a hammer or drill it. However, do it with care when drilling or rapping the cylinder can cause damage to the steering column.
The new ignition cylinder will be installed once the old one is removed. Then, you'll have to code the new cylinder in order that it matches the key in terms of sequence and orientation. You will also need to take out and examine the tumblers. You'll also need to replace any tumblers that are worn out.
After replacing the cylinder, you'll need to connect the steering wheel and dashboard covers in the correct order. Reattach the dashboard and steering column covers in the proper order. Be careful not to disturb the wiring. remote key fob repair to accidentally cut off or destroy vital electronics. It's also important to reattach the negative battery cable and test your new ignition.
Key Programming
Modern car keys include computer chips that communicate with the vehicle. In order for the keys to start the engine the chip and the car have to "know each other".
A locksmith with experience in a wide range of vehicles can reprogram your new key to your car quickly. They can also assist if the lock on your car key has been damaged.
Many car locksmiths will inform you that the process can take as little as one minute if all steps are done correctly. It could take longer for OBD2 programming or EEPROM programming, since these procedures require your locksmith to extract specific modules from the car (security components) in order to determine the correct passcode as well as stored key data. These types of procedures should be left to professionals who have extensive knowledge of circuit boards and electronics and can reduce the risk of corrupting data.
People frequently forget their keys to their car at home, or put keys in the trunk of their car after putting groceries in the back seat. In these situations it's not uncommon to find yourself stranded by the side of the road with no way to get to your home or where you want to go. Your locksmith can program a spare key for your vehicle so you can drive around again.
The lock could be damaged or the key could be inoperable due to wear and tear. If the teeth on your car keys no longer fit into the lock, you need to consider replacing the key.
Many people try to reprogram their car keys themselves. However, it's recommended that you hire a professional instead. It's not uncommon for these DIY methods to alter the data on your keys, which can cause it to fail, or worse end up damaging your security system. A professional will have a much less chance of making a mistake that could cost you thousands of dollars in the future.
Broken Key Removal
If your car key is broken inside the cylinder of ignition and you need to remove the broken piece. It will be impossible to drive your car until the key is removed and it is recommended to contact an expert for this job, as there is a chance of causing damage to the ignition by improper use of lubricants or extraction tools. If you want to fix your broken car keys at home there are a few methods that can aid.
A pair of needle-nosed pliers with longer tips can be used to grasp the key end that is still stuck in the ignition. You can also improve the pliers by securing the business side of them with a sticky substance such as super glue, melted tallow, or putty. Once this is done the people will be able to hold onto the key fragment and pull it out of the cylinder.
A set of thin, stiff wire can be a great tool for sliding over a broken car key and pulling it out of the lock. Paperclips are a good tool for this however, you must bend the ends in a way so that the fragment of the key is held by the wider surface.
Mini hacksaw blades are used to repair damaged keys. They should be thin and compact to fit inside the small openings in the cylinders for ignition. These tools are available in hardware stores and the auto parts sections of large box retailers.
Spraying lubricant into the keyhole can also help. It could loosen the piece that is stuck and make it easier to remove. Don't try to force a damaged car key out, since it could cause more damage to the key, and even the ignition. A car key that is bent or broken in half can be a dangerous and difficult project to fix, so it's recommended to keep a spare key for your car in a safe place in all at all times.