How To Beat Your Boss With Repairs To Upvc Windows

Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as aluminum and timber.
It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good working order.
For single pane windows, it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. However If windows with double panes are secured by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance you'll need to find some plastic spacers to aid the new pane in being able to fit correctly into the window frame.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.
Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as this will offer the best of both worlds.
2. Sagging
uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.
To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.
If you can't reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.
uPVC handles could also become loose. Most often, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.
This is a fairly simple fix that can be done by any competent DIYer. Depending on how severe the issue is, the old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.
Check that any drainage holes do not have debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.
Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.
It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or slack and open with ease It could be hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be done within a few minutes.
Like any mechanical part hinges are prone to be damaged over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame in place.
It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or by inadequate installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to give suggestions.
Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. upvc window repair near me can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts in upvc windows can be caused by a few different things. The hinges can also become misaligned due to wear, creating a gap between the frame and sash. They can be fixed by giving them a good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. The interlock may be misaligned. This is located on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.
The next common cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.
The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cosy!
Your upvc windows can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you have any problems with your window made of upvc you should consult a professional immediately.